Jerry,
I got the code to run, but I can never get any data in or out.

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

________________________________
From: Jerry West
To: A...
Sent: Sun, December 20, 2009 10:50:16 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

[Attachment(s) from Jerry West included below]
This runs under linux

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis
kerrisk
Sent: Sunday, December 20, 2009 6:19 PM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

But what user mode
programs do you use to read the adc via the SPI?

Dennis
Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

________________________________

From:Jerry West

To: AT91SAM@yahoogroups .com
Sent: Sun, December 20, 2009 4:08:31 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

I am using Debian 5.0.2-1 and run on
atmel 6263 on a cogent computers csb737. I use spi for external 24 bit sigma
delta adc.

The linux is configured for that board.

jerry

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis
kerrisk
Sent: Sunday, December 20, 2009 5:01 PM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

2.6.30, and I have the ATMEL drivers included in the
kernel. I just need to know how to access those from a use mode program?

Dennis Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

________________________________

From:Jerry
West
To: AT91SAM@yahoogroups .com
Sent: Sun, December 20, 2009 3:27:20 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

What linux are you running? You need a
device driver in linux for your device.

jerry

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis
kerrisk
Sent: Sunday, December 20, 2009 9:58 AM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

I tweaked it to run un linux. But I cannot access the
addresses for the registers of the SPI controller. I tried remapping the
physical addresses to virtual addresses that my program could use, but they are
all 0's. it seems like my mapping is not correct.

Dennis Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

________________________________

From:Jerry
West
To: AT91SAM@yahoogroups .com
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

This system is under Keil RL-ARM. Works
2 devices.

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo.
com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

This runs under linux

From: A... [mailto:A...] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 6:19 PM
To: A...
Subject: Re: [AT91SAM] SPI programing on at91sam9263

But what user mode programs do you use to read the adc via the SPI?

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

_____

From: Jerry West
To: A...
Sent: Sun, December 20, 2009 4:08:31 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

I am using Debian 5.0.2-1 and run on atmel 6263 on a cogent computers csb737. I use spi for external 24 bit sigma delta adc.

The linux is configured for that board.

jerry

From: AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 5:01 PM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

2.6.30, and I have the ATMEL drivers included in the kernel. I just need to know how to access those from a use mode program?

Dennis Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

_____

From: Jerry West
To: AT91SAM@yahoogroups .com
Sent: Sun, December 20, 2009 3:27:20 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

What linux are you running? You need a device driver in linux for your device.

jerry

From: AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 9:58 AM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

I tweaked it to run un linux. But I cannot access the addresses for the registers of the SPI controller. I tried remapping the physical addresses to virtual addresses that my program could use, but they are all 0's. it seems like my mapping is not correct.

Dennis Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

_____

From: Jerry West
To: AT91SAM@yahoogroups .com
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

This system is under Keil RL-ARM. Works 2 devices.

From: AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo. com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

But what user mode programs do you use to read the adc via the SPI?
Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

________________________________
From: Jerry West
To: A...
Sent: Sun, December 20, 2009 4:08:31 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

I am using Debian 5.0.2-1 and run on atmel 6263 on a cogent computers
csb737. I use spi for external 24 bit sigma delta adc.

The linux is configured for that board.

jerry

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis
kerrisk
Sent: Sunday, December 20, 2009 5:01 PM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

2.6.30,
and I have the ATMEL drivers included in the kernel. I just need to know how to
access those from a use mode program?

Dennis
Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

________________________________

From:Jerry West

To: AT91SAM@yahoogroups .com
Sent: Sun, December 20, 2009 3:27:20 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

What linux are you running? You need a
device driver in linux for your device.

jerry

From:AT91SAM@yahoogroups
.com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 9:58 AM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

I tweaked it to run un linux. But I cannot access the
addresses for the registers of the SPI controller. I tried remapping the
physical addresses to virtual addresses that my program could use, but they are
all 0's. it seems like my mapping is not correct.

Dennis Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

________________________________

From:Jerry
West
To: AT91SAM@yahoogroups .com
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

This system is under Keil RL-ARM. Works
2 devices.

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo.
com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

I am using Debian 5.0.2-1 and run on atmel 6263 on a cogent computers csb737. I use spi for external 24 bit sigma delta adc.

The linux is configured for that board.

jerry

From: A... [mailto:A...] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 5:01 PM
To: A...
Subject: Re: [AT91SAM] SPI programing on at91sam9263

2.6.30, and I have the ATMEL drivers included in the kernel. I just need to know how to access those from a use mode program?

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

_____

From: Jerry West
To: A...
Sent: Sun, December 20, 2009 3:27:20 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

What linux are you running? You need a device driver in linux for your device.

jerry

From: AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 9:58 AM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

I tweaked it to run un linux. But I cannot access the addresses for the registers of the SPI controller. I tried remapping the physical addresses to virtual addresses that my program could use, but they are all 0's. it seems like my mapping is not correct.

Dennis Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

_____

From: Jerry West
To: AT91SAM@yahoogroups .com
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

This system is under Keil RL-ARM. Works 2 devices.

From: AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo. com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

2.6.30, and I have the ATMEL drivers included in the kernel. I just need to know how to access those from a use mode program?

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

________________________________
From: Jerry West
To: A...
Sent: Sun, December 20, 2009 3:27:20 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263

What linux are you running? You need a device driver in linux
for your device.

jerry

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of Dennis
kerrisk
Sent: Sunday, December 20, 2009 9:58 AM
To: AT91SAM@yahoogroups .com
Subject: Re: [AT91SAM] SPI programing on at91sam9263

I
tweaked it to run un linux. But I cannot access the addresses for the registers
of the SPI controller. I tried remapping the physical addresses to virtual
addresses that my program could use, but they are all 0's. it seems like my
mapping is not correct.

Dennis
Kerrisk
720-542-8504
303-668-0736
dennis_k85@yahoo. com

________________________________

From:Jerry West

To: AT91SAM@yahoogroups .com
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

This system is under Keil RL-ARM. Works
2 devices.

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo.
com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

What linux are you running? You need a device driver in linux for your device.

jerry

From: A... [mailto:A...] On Behalf Of Dennis kerrisk
Sent: Sunday, December 20, 2009 9:58 AM
To: A...
Subject: Re: [AT91SAM] SPI programing on at91sam9263

I tweaked it to run un linux. But I cannot access the addresses for the registers of the SPI controller. I tried remapping the physical addresses to virtual addresses that my program could use, but they are all 0's. it seems like my mapping is not correct.

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

_____

From: Jerry West
To: A...
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

This system is under Keil RL-ARM. Works 2 devices.

From: AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo. com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

I tweaked it to run un linux. But I cannot access the addresses for the registers of the SPI controller. I tried remapping the physical addresses to virtual addresses that my program could use, but they are all 0's. it seems like my mapping is not correct.

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

________________________________
From: Jerry West
To: A...
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

[Attachment(s) from Jerry West included below]
This system is under Keil RL-ARM. Works 2 devices.

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo. com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk

Thanks,. I'll give them a look.

Dennis Kerrisk
720-542-8504
303-668-0736
d...@yahoo.com

________________________________
From: Jerry West
To: A...
Sent: Sat, December 19, 2009 12:52:21 PM
Subject: RE: [AT91SAM] SPI programing on at91sam9263 [2 Attachments]

[Attachment(s) from Jerry West included below]
This system is under Keil RL-ARM. Works 2 devices.

From:AT91SAM@yahoogroups .com [mailto:AT91SAM@ yahoogroups. com] On Behalf Of dennis_k85@yahoo. com
Sent: Saturday, December 19, 2009 12:41 PM
To: AT91SAM@yahoogroups .com
Subject: [AT91SAM] SPI programing on at91sam9263

Does anyone have any examples of programing the SPI at91sam?

Dennis Kerrisk