> realtimenewbie wrote:
>> I am looking for a tool that allows me to use UML to design/simulate
>> embedded systems. Is there another program I can use other than Rose
>> RealTime, or is this the best choice available.
>
> BridgePoint (Now Mentor, was project technology)
>
How does it compare to iUML (Kennedy Carter)?
Reply by Leif Holmgren●April 20, 20062006-04-20
realtimenewbie wrote:
> I am looking for a tool that allows me to use UML to design/simulate
> embedded systems. Is there another program I can use other than Rose
> RealTime, or is this the best choice available.
BridgePoint (Now Mentor, was project technology)
Reply by Ansatt●April 19, 20062006-04-19
Hi,
I've been using Rose for a lot of years. I would tell you, don't go for
it. After it has become IBM no developemnt is apperantly done. The IBM
web site is a nightmare to navigate in to find FAQ, and technical notes.
I have no experience regarding simulating, I sounds nice, but if the
answer is Rose I would say 'no thank you'.
I have bought a case tool from www.sparxsystems.au, called Enterprise
Architect. I'm very pleased, and the price is aproximately 10% of Rose
C++.
In article <1145363168.323851.182790@u72g2000cwu.googlegroups.com>,
laithca@yahoo.com says...
> Hello,
>
> I am looking for a tool that allows me to use UML to design/simulate
> embedded systems. Is there another program I can use other than Rose
> RealTime, or is this the best choice available.
>
> Thanks -v- much.
>
>
--
Regards
Ole Asbjorn Fadum
Scanmar AS
Reply by swen...@gmail.com●April 18, 20062006-04-18
realtimenewbie wrote:
> Hello,
>
> I am looking for a tool that allows me to use UML to design/simulate
> embedded systems. Is there another program I can use other than Rose
> RealTime, or is this the best choice available.
>
> Thanks -v- much.
There are lots of tools available. Rhapsody and Artisan Real Time
Studio are 2 good one to take a look at. Rhapsody is very good but
don't limit it to just these there are a bunch you should look at
before you decide.
Reply by Stef Mientki●April 18, 20062006-04-18
realtimenewbie wrote:
> Hello,
>
> I am looking for a tool that allows me to use UML to design/simulate
> embedded systems. Is there another program I can use other than Rose
> RealTime, or is this the best choice available.
>
> Thanks -v- much.
>
you could take a look at Argo UML
Stef Mientki
Reply by realtimenewbie●April 18, 20062006-04-18
Hello,
I am looking for a tool that allows me to use UML to design/simulate
embedded systems. Is there another program I can use other than Rose
RealTime, or is this the best choice available.
Thanks -v- much.