Also the micrel/kendin KS8721with MDIX works well with the AT91RM9200.
Reply by Chris_99●May 6, 20062006-05-06
Ulf Samuelsson wrote:
> Chris_99 wrote:
> > Ulf Samuelsson wrote:
> >> Chris_99 wrote:
> >>> Group:
> >>>
> >>> Has anyone had any success incorporating Auto-MDIX using the:
> >>>
> >>> -Infineon ADM7001?
> >>> -Davicom DM9161A
> >>
> >> Yes, this works with the AT91RM9200 and Davicom.
> >> In fact, it is the only mode which works with some switches,
> >> D-Link, Intel etc, which does not seem to be able to detect 100 Mbps
> >> full duplex and enters 100 Mbps Half Duplex mode.
> >>
> >>> - success with any other phy-only chip?
> >>>
> >>
> >>
> > Ulf:
> >
> > What were the magnetics that worked? Was it an integrated
> RJ-45/magnetics?
> > Was/is there a reference schematic I could find somewhere?
> >
>
> The AT91RM9200EK Schematics should contain the info you need
> Look at www.at91.com
>
Ulf:
In Orcad Yet!.....Sweet!
Thanks for your help.
Chris
Reply by Ulf Samuelsson●May 6, 20062006-05-06
Chris_99 wrote:
> Ulf Samuelsson wrote:
>> Chris_99 wrote:
>>> Group:
>>>
>>> Has anyone had any success incorporating Auto-MDIX using the:
>>>
>>> -Infineon ADM7001?
>>> -Davicom DM9161A
>>
>> Yes, this works with the AT91RM9200 and Davicom.
>> In fact, it is the only mode which works with some switches,
>> D-Link, Intel etc, which does not seem to be able to detect 100 Mbps
>> full duplex and enters 100 Mbps Half Duplex mode.
>>
>>> - success with any other phy-only chip?
>>>
>>
>>
> Ulf:
>
> What were the magnetics that worked? Was it an integrated
RJ-45/magnetics?
> Was/is there a reference schematic I could find somewhere?
>
The AT91RM9200EK Schematics should contain the info you need
Look at www.at91.com
> Thanks
>
> Chris
--
Best Regards,
Ulf Samuelsson
ulf@a-t-m-e-l.com
This message is intended to be my own personal view and it
may or may not be shared by my employer Atmel Nordic AB
Reply by Chris_99●May 5, 20062006-05-05
Ulf Samuelsson wrote:
> Chris_99 wrote:
> > Group:
> >
> > Has anyone had any success incorporating Auto-MDIX using the:
> >
> > -Infineon ADM7001?
> > -Davicom DM9161A
>
> Yes, this works with the AT91RM9200 and Davicom.
> In fact, it is the only mode which works with some switches,
> D-Link, Intel etc, which does not seem to be able to detect 100 Mbps full
> duplex and enters 100 Mbps Half Duplex mode.
>
> > - success with any other phy-only chip?
> >
>
>
Ulf:
What were the magnetics that worked? Was it an integrated
RJ-45/magnetics?
Was/is there a reference schematic I could find somewhere?
Thanks
Chris
Reply by Ulf Samuelsson●May 5, 20062006-05-05
Chris_99 wrote:
> Group:
>
> Has anyone had any success incorporating Auto-MDIX using the:
>
> -Infineon ADM7001?
> -Davicom DM9161A
Yes, this works with the AT91RM9200 and Davicom.
In fact, it is the only mode which works with some switches,
D-Link, Intel etc, which does not seem to be able to detect 100 Mbps full
duplex and enters 100 Mbps Half Duplex mode.
> - success with any other phy-only chip?
>
>
> Thanks
>
> Chris
--
Best Regards,
Ulf Samuelsson
ulf@a-t-m-e-l.com
This message is intended to be my own personal view and it
may or may not be shared by my employer Atmel Nordic AB
Reply by Chris_99●May 5, 20062006-05-05
Group:
Has anyone had any success incorporating Auto-MDIX using the:
-Infineon ADM7001?
-Davicom DM9161A
- success with any other phy-only chip?
Thanks
Chris