There is a long chain of hardware and software functions to read an
ADC, calibrate and format the reading for display, and place the
result on a display. The chain doesn't work. Only you can determine
what link(s) in the chain is/are broken.
Your options are: 1) quit; 2) dive in and learn what microcomputer
programming is all about.
DaveS
On Thu, Jul 22, 2010 at 3:31 AM, shweta wrote: > hi, i am interfacing ads7825 in parallel connection
with lpc2148.
> In that i am giving data to only one channel 0 and other channels are ground.
i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of ADS7825
.But there is no effect of potentiometer.i am vary potentiometer but lcd display
only 0v .
> reply what can i do for that.
>
> --- In l..., "capiman26061973" wrote:
>> Hello Shweta,
>>
>> > i want to display digital data which is coming from ADS7825 IC.
>> > no data is display on lcd.
>> > In my code if there u find any error help me.
>>
>> it is your code, you must search your errors.
>> I am not getting paid for searching your errors, sorry.
>> But i (we) can help you to find your errors.
>>
>> So again the question (as already posted in earlier email):
>> What have you already tried out ?
>>
>> Best regards,
>>
>> Martin
>>
>
Great ! What was the problem ?
Can you please upload a working version of your code,
so other can learn from it when they are in the same situation ?
Best regards and thanks,
Martin
Reply by Nicholas Lusty●July 22, 20102010-07-22
It sounds like you followed his advice and got it functioning for yourself
without help. (Much better than getting help if you are clever enough to do
it).
----- Original Nachricht ----
Von: Shweta Parmar
An: l...
Datum: 22.07.2010 13:46
Betreff: Re: [lpc2000] Re: urgent : need help for ads7825
> stupid, my code is working , i am not dependent on
your code so don't think
> that you are chated me. ok.
>
> On Thu, Jul 22, 2010 at 5:12 PM, 42Bastian
> wrote:
>
> >
> >
> > Am 22.07.2010 13:37, schrieb Shweta Parmar:
> >
> > >
> > >
> > > i can't see your source code so your code into the file section.
> > > sorry again
> >
> > It was meant ironical, as a joke. I do not have any source code for this.
> > Debug your code.
> >
> > --
> > 42Bastian
> > +
> > | http://www.sciopta.com
> > | Fastest direct message passing kernel.
> > | IEC61508 certified.
> > +
> >
> Nicholas Lusty
Mead House
High Street
Box
CORSHAM
SN13 8NN
UK
Tel: 01225 742619
Reply by Shweta Parmar●July 22, 20102010-07-22
stupid, my code is working , i am not dependent on your code so don't
think
that you are chated me. ok.
On Thu, Jul 22, 2010 at 5:12 PM, 42Bastian wrote:
> Am 22.07.2010 13:37, schrieb Shweta Parmar:
>
> >
> >
> > i can't see your source code so your code into the file section.
> > sorry again
>
> It was meant ironical, as a joke. I do not have any source code for this.
> Debug your code.
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
Reply by Paul Curtis●July 22, 20102010-07-22
On Thu, 22 Jul 2010 12:37:01 +0100, Shweta Parmar
wrote:
> i can't see your source code so your code into
the file section.
> sorry again
You gotta stop it! :-) This is killing me! I'll never get any work
done. :-)
i can't see your source code so your code into the file section.
sorry again
On Thu, Jul 22, 2010 at 4:58 PM, 42Bastian wrote:
> Am 22.07.2010 13:14, schrieb Shweta Parmar:
>
> >> What do you expect as answer ?
> >> Maybe: I have done the same, here is the source code free of charge.
> ;-)
> >
> >
> > sorry, where is your source code?
> > reply
>
> *ROTFL*, you made my day :-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
> Yahoo! Groups Links
Reply by 42Bastian●July 22, 20102010-07-22
Am 22.07.2010 13:14, schrieb Shweta Parmar:
>> What do you expect as answer ?
>> Maybe: I have done the same, here is the source code free of charge.
;-)
> sorry, where is your source code?
> reply
> Am 22.07.2010 12:31, schrieb shweta:
>
> > hi, i am interfacing ads7825 in parallel connection with lpc2148.
> > In that i am giving data to only one channel 0 and other channels are
> ground. i am getting 0v on LCD .Also i connect one potentiometer to pin 2
of
> ADS7825 .But there is no effect of potentiometer.i am vary potentiometer
but
> lcd display only 0v .
> > reply what can i do for that.
>
> Debug it. Measure it. Fix it.
>
> What do you expect as answer ?
> Maybe: I have done the same, here is the source code free of charge. ;-)
>
> --
> 42Bastian
> +
> | http://www.sciopta.com
> | Fastest direct message passing kernel.
> | IEC61508 certified.
> +
>
>
Reply by 42Bastian●July 22, 20102010-07-22
Am 22.07.2010 12:31, schrieb shweta: > hi, i am interfacing ads7825 in parallel connection
with lpc2148.
> In that i am giving data to only one channel 0 and other channels are ground.
i am getting 0v on LCD .Also i connect one potentiometer to pin 2 of ADS7825
.But there is no effect of potentiometer.i am vary potentiometer but lcd display
only 0v .
> reply what can i do for that.
Debug it. Measure it. Fix it.
What do you expect as answer ?
Maybe: I have done the same, here is the source code free of charge. ;-)
