On Tue, 16 May 2006 08:12:37 -0500, "mayureshsawant81"
<mayureshsawant81@yahoo.com> wrote:
>Hi all,
>
>I have 4 boards, on one board lauterbach GUI is stable (flash contents)-
>it is not running. But on other three boards it is jumping.
"jumping" ??
Try to be more specific.
>So my client
>says, the boards are ok, b'caz they are also use the same boards. So I
>dont understand what is the problem? Is this really lauterbach issue?
>
>And one more every board runs on differen Ejtag clock freq (10,25 or 5
>Mhz)
Do you have the right setup (RAM,CS etc).
Why different JTAG speeds ? You wrote these are the same boards ?
--
42Bastian
Do not email to bastian42@yahoo.com, it's a spam-only account :-)
Use <same-name>@monlynx.de instead !
Reply by mayureshsawant81●May 16, 20062006-05-16
Hi all,
I have 4 boards, on one board lauterbach GUI is stable (flash contents)-
it is not running. But on other three boards it is jumping. So my client
says, the boards are ok, b'caz they are also use the same boards. So I
dont understand what is the problem? Is this really lauterbach issue?
And one more every board runs on differen Ejtag clock freq (10,25 or 5
Mhz)
Please help....
Regards,
Mayuresh