On 30 May 2006 00:22:05 -0700, shankar.vk@gmail.com wrote:

>Hi,
>
>          Has anybody used Trace32 debugger with AMX rtos on ARM9
>target ?

I don't know AMX, but you should point those questions to the 
manufature of AMX and/or to Lauterbach.

-- 
42Bastian
Do not email to bastian42@yahoo.com, it's a spam-only account :-)
Use <same-name>@monlynx.de instead !

On 2 Jun 2006 shankar.vk@gmail.com wrote:

[snip your post]
[snip entire previous posts]

Hi,

incase you are new to the comp.sys.arm news group, there are a few
conventions we follow to make it far easier for everyone to read.

1) The reply you type should be after the previous message(s) text, or
   interleaved with it. Not at the top, which is the default for some PC
   software such as Outlook and Outlook Express - these particular programs
   can be fixed with a patches from:-
   http://home.in.tum.de/~jain/software/outlook-quotefix/
   http://home.in.tum.de/~jain/software/oe-quotefix/
   
2) You should edit the previous message(s) to just the points directly
   relevant to your reply, and not just include the entire thing.

3) Make sure all your lines are less than 76 characters wide, to prevent
   unsightly spillage of odd words on to the next line, and to make it
   easier for people replying.

For further information please refer to the following:-

The news.newusers.questions FAQ http://www.plig.net/nnq/nquote.html
How to post to uk news groups   http://www.usenet.org.uk/ukpost.html
Proper quoting style explained  http://www.uwasa.fi/~ts/http/quote.html

Thank you for your cooperation.

Anyone ???


shankar.vk@gmail.com wrote:
> Hi,
>
>           Has anybody used Trace32 debugger with AMX rtos on ARM9
> target ?
>
> Can you tell me how to ask the debugger to  map  task  tag   to task
> name ?
>
> Now, the  tag   is  getting displayed as  a number equal to the
> enumeration value of the task id.
>
> Reading the debugger display will be easier for me if the debugger
> shows the task name instead of task id.
> 
>                                  thanks

Hi,

          Has anybody used Trace32 debugger with AMX rtos on ARM9
target ?

Can you tell me how to ask the debugger to  map  task  tag   to task
name ?

Now, the  tag   is  getting displayed as  a number equal to the
enumeration value of the task id.

Reading the debugger display will be easier for me if the debugger
shows the task name instead of task id.

                                 thanks