The Altium software has all the functionality for creating the chip such as
sam9g15 from scratch. It is pretty simple, just look at the datasheet with the
measurements, then design the chip in the symbol designer for Altium.
Best,
MT
________________________________
From: "t...@topazsystems.com"
To: A...
Sent: Monday, July 16, 2012 9:40 PM
Subject: [AT91SAM] SAM9 LIB symbols for Altium
I am starting a design with the SAM9G15. Since its been around a while I'm
hoping someone can point me to library symbols for Altium Designer so I
don't have to create them from scratch.
Thanks.
TJ
Reply by tom_...@topazsystems.com●July 16, 20122012-07-16
don
Thanks Don. Got it. Guess I should've checked there first.
Cheers!
TJ
Reply by Donald H●July 16, 20122012-07-16
--- In A..., tom_j@... wrote: >
> I am starting a design with the SAM9G15. Since its been around a while
I'm hoping someone can point me to library symbols for Altium Designer so I
don't have to create them from scratch.
> Thanks.
>
> TJ
>
Reply by tom_...@topazsystems.com●July 16, 20122012-07-16
I am starting a design with the SAM9G15. Since its been around a while I'm
hoping someone can point me to library symbols for Altium Designer so I
don't have to create them from scratch.
Thanks.