> for spammers schreef:
>> On Sun, 11 Jun 2006 05:01:53 -0700, Erik van Veen wrote:
>>>
>>> Because of the FX1 from Cypress is hard to get for me at this
>>> place on earth, I was looking for an alternative and found a
>>> nice one: the MC68HC908JB8.
>>>
>>> I designed a little piece of hardware to develop and I'm
>>> looking for a code template now. I've searched the net, but I
>>> couldn't find much, or I have to buy the expensive USB08 board.
>>>
>>> Does anyone know where I can find a template or a simple project
>>> that I could use as a starting point?
>>
>> Not exactly a template, but it is working usb code for the JB8:
>>
>> http://www.freescale.com/files/microcontrollers/hardware_tools/community/TBDML_f.ZIP?srch=1
>>
>> In there you'll find a project for the JB8 which should help,
>> sw_jb8_03.zip.
>
> OK, thanks
>
> Working code would also be fine, as long as I have an example
> how to do the trick.
> I'll look for this project and try to get it working.
OK, thanks
Working code would also be fine, as long as I have an example how to do
the trick.
I'll look for this project and try to get it working.
for spammers schreef:
> On Sun, 11 Jun 2006 05:01:53 -0700, Erik van Veen wrote:
>
> > Hi,
> >
> > Because of the FX1 from Cypress is hard to get for me at this place on
> > earth, I was looking for an alternative and found a nice one: the
> > MC68HC908JB8.
> >
> > I designed a little piece of hardware to develop and I'm looking for a
> > code template now. I've searched the net, but I couldn't find much, or I
> > have to buy the expensive USB08 board.
> >
> > Does anyone know where I can find a template or a simple project that I
> > could use as a starting point?
>
> Not exactly a template, but it is working usb code for the JB8:
>
> http://www.freescale.com/files/microcontrollers/hardware_tools/community/TBDML_f.ZIP?srch=1
>
> In there you'll find a project for the JB8 which should help,
> sw_jb8_03.zip.
>
> > TIA,
> >
> > Erik
Reply by for spammers●June 12, 20062006-06-12
On Sun, 11 Jun 2006 05:01:53 -0700, Erik van Veen wrote:
> Hi,
>
> Because of the FX1 from Cypress is hard to get for me at this place on
> earth, I was looking for an alternative and found a nice one: the
> MC68HC908JB8.
>
> I designed a little piece of hardware to develop and I'm looking for a
> code template now. I've searched the net, but I couldn't find much, or I
> have to buy the expensive USB08 board.
>
> Does anyone know where I can find a template or a simple project that I
> could use as a starting point?
Hi,
Because of the FX1 from Cypress is hard to get for me at this place
on earth, I was looking for an alternative and found a nice one:
the MC68HC908JB8.
I designed a little piece of hardware to develop and I'm looking for a
code template now. I've searched the net, but I couldn't find much, or
I have to buy the expensive USB08 board.
Does anyone know where I can find a template or a simple project
that I could use as a starting point?
TIA,
Erik