> Does anyone have a good alternative for software development on a
> MCS1210 from Texas Instruments? The wickenhaeuser.com website is for
> me the only c-compiler i know of that is usable. Is IAR systems also
> possible to use? Anyone with experience with c-compilers on a MCS1210?
> I'm used to work with IAR or HiTech for PICs but now i want to use it
> with a MSC1210 (the one used in the Elektor project : Mini Webserver)
> if possible. Any good open source compiler usable or a Free one with
> no limits? Something like SDCC for 8051?
I use SDCC and asx8051 to develop code for the MSC12xx. The generated
code isn't quite as tight as that produced by a good commercial
compiler, but it is quite usable. About all you'll need is the
definitions for the MSC-specific registers. Look for application note
SBAA109 on the TI web site (there are bugs in the script used to convert
the header files).
Marc
Reply by Chris Hills●November 7, 20042004-11-07
In article <d793d683.0411071350.53fcf740@posting.google.com>, Timo
<timo6666@pandora.be> writes
>Hi to all,
>
>Does anyone have a good alternative for software development on a
>MCS1210 from Texas Instruments? The wickenhaeuser.com website is for
>me the only c-compiler i know of that is usable.
The Keil is the best bet.
> Is IAR systems also
>possible to use? Anyone with experience with c-compilers on a MCS1210?
Yes. I have used the Keil compiler. The MCS1210 was designed to work
with the Keil compiler.
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/\
/\/\/ chris@phaedsys.org www.phaedsys.org \/\/
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by Timo●November 7, 20042004-11-07
Hi to all,
Does anyone have a good alternative for software development on a
MCS1210 from Texas Instruments? The wickenhaeuser.com website is for
me the only c-compiler i know of that is usable. Is IAR systems also
possible to use? Anyone with experience with c-compilers on a MCS1210?
I'm used to work with IAR or HiTech for PICs but now i want to use it
with a MSC1210 (the one used in the Elektor project : Mini Webserver)
if possible. Any good open source compiler usable or a Free one with
no limits? Something like SDCC for 8051?
Best regards,
Timo