Reply by prad...@avnet.com ●September 28, 20132013-09-28









http://www.amazon.com/MSP430-Microcontroller-Basics-John-Davies/dp/0750682760

 

In india it's INR420/- (7$).

Just for this cause you don't want to purchase this book. You will get so much information from internet. Also TI documentation on msp430 is quite good.



---In m..., <m...> wrote:

Thank you!
Your answer is full. Can you send me (or here) link to this book or file?

PS: Sorry, if it double - I'm not sure my e-mail answer was sended correct. 

Oleg Terentiev



---In m..., <m...> wrote:

TACLK is External.

INCLK is also External, sometimes a seperate pin but often it is connected through an inverter to the pin for TACLK so that INCLK  = !TACLK (inverted)

 

TAR increments on the rising (positive) edge of the clock. The arrangement INCLK = !TACLK in many devices allow TAR to be clocked in falling (negative) edge of the external clock if required..

 

this i got from "MSP430 Microcontroller basics" book



---In m..., <m...> wrote:

Hi, All!

What is different TACLK and INCLK ? I have read about TimerA, I want use it on MSP430F2013. But, I can't catch different betwen this mnemonic. And - I'm beginner in MSP.



 Oleg Terentiev,  Russia, Krasnoyarsk










__._,_.___






















stime80384182













__,_._,___

Beginning Microcontrollers with the MSP430

Reply by t.ol...@ymail.com ●September 28, 20132013-09-28









Thank you!
Your answer is full. Can you send me (or here) link to this book or file?

PS: Sorry, if it double - I'm not sure my e-mail answer was sended correct. 

Oleg Terentiev



---In m..., <m...> wrote:

TACLK is External.

INCLK is also External, sometimes a seperate pin but often it is connected through an inverter to the pin for TACLK so that INCLK  = !TACLK (inverted)

 

TAR increments on the rising (positive) edge of the clock. The arrangement INCLK = !TACLK in many devices allow TAR to be clocked in falling (negative) edge of the external clock if required..

 

this i got from "MSP430 Microcontroller basics" book



---In m..., <m...> wrote:

Hi, All!

What is different TACLK and INCLK ? I have read about TimerA, I want use it on MSP430F2013. But, I can't catch different betwen this mnemonic. And - I'm beginner in MSP.



 Oleg Terentiev,  Russia, Krasnoyarsk










__._,_.___






















stime80349311













__,_._,___
Reply by t.ol...@ymail.com ●September 28, 20132013-09-28









 Thank you!
I have seen table 12 in datasheet ( I can use search :) ) ,
but in Family User Guide on block diagram its two different inputs! For
choice its need to use two different codes. And I have one more
question - what is different betwen "DEVICE INPUT SIGNAL" and "MODULE
INPUT NAME".
I catch main idea - it is equels. Thank you one more time.
PS: Sorry, if it double - I'm not sure my e-mail answer was sended correct.
 Oleg Terentiev,  Russia, Krasnoyarsk




---In m..., <m...> wrote:

Oleg Terentiev <t.oleg@...>:



> Hi, All!

> What is different TACLK and INCLK ? I have read about TimerA, I want use

> it on MSP430F2013. But, I can't catch different betwen this mnemonic.

> And - I'm beginner in MSP.



Try to search the two relevant pdf's (msp430f2013.pdf and users guide

slau144) for "INCLK".



Answer: msp430f2013.pdf on page 17: INCLK and ACLK are equal, it is just a

different module name. This may be different for other MSP430 devices.



M.










__._,_.___






















stime80349153













__,_._,___
Reply by Oleg Terentiev ●September 27, 20132013-09-27
Thank you!
Your answer is full. Can you send me (or here) link to this book or file?
 Oleg Terentiev,  Russia, Krasnoyarsk
Reply by Oleg Terentiev ●September 27, 20132013-09-27
Thank you!
I have seen table 12 in datasheet ( I can use search :) ) , but in Family User Guide on block diagram its two different inputs! For choice its need to use two different codes. And I have one more question - what is different betwen "DEVICE INPUT SIGNAL" and "MODULE INPUT NAME".
I catch main idea - it is equels. Thank you one more time.

 Oleg Terentiev,  Russia, Krasnoyarsk
Reply by prad...@avnet.com ●September 27, 20132013-09-27
TACLK is External.

INCLK is also External, sometimes a seperate pin but often it is connected through an inverter to the pinfor TACLK so that INCLK = !TACLK (inverted)



TAR increments on the rising (positive) edge of the clock. The arrangement INCLK = !TACLK in many devices allow TAR to be clocked in falling (negative) edge of the external clock if required..



this i got from "MSP430 Microcontroller basics" book
Reply by Matthias Weingart ●September 27, 20132013-09-27
Oleg Terentiev :

> Hi, All!
> What is different TACLK and INCLK ? I have read about TimerA, I want use
> it on MSP430F2013. But, I can't catch different betwen this mnemonic.
> And - I'm beginner in MSP.

Try to search the two relevant pdf's (msp430f2013.pdf and users guide
slau144) for "INCLK".

Answer: msp430f2013.pdf on page 17: INCLK and ACLK are equal, it is just a
different module name. This may be different for other MSP430 devices.

M.
Reply by psep...@gmail.com ●September 27, 20132013-09-27
There are two different input pins that TimerA can use. I think only one is available on the F2013 (or both might be assigned to the same pins, check the datasheet)
Reply by Oleg Terentiev ●September 26, 20132013-09-26
Hi, All!
What is different TACLK and INCLK ? I have read about TimerA, I want use it on MSP430F2013. But, I can't catch different betwen this mnemonic. And - I'm beginner in MSP.

Oleg Terentiev, Russia, Krasnoyarsk