> > the PC, but my understanding is that U-Boot is configured to boot the
> > OS off the hard disk if possible, or off the slenderized flash image
> > if the HDD is missing or unformatted. Is that accurate? It makes my
> 
> Ask them for the sources of U-Boot they use and see for yourself.  I
> just checked the current CVS and can't find a "kuro" (or similar)
> configuration - but as U-Boot is GPL they have to provide you with the

Their technical support is to all intents and purposes nonexistent. It
might be better in Japan, but basically this whole thing is just one
step shy of "here's your box, here are some downloads, go away". Most
of the readme files, etc. are in Japanese.

I dumped the first few megs of the hard disk, and it appears that GRUB
is installed. Interesting, I wasn't even aware it had been ported.

I'm still pretty hazy on how the boot process works, because
installing a new kernel DOES involve a firmware upgrade. I'm trying to
work out what's going on right now.

Hi Lewin,

> I am just in the process of hacking up a USB-serial converter as being
> the easiest way of bringing that weird inverted 3.3V debug port into
> the PC, but my understanding is that U-Boot is configured to boot the
> OS off the hard disk if possible, or off the slenderized flash image
> if the HDD is missing or unformatted. Is that accurate? It makes my
> life easier if this is the case, since I won't have to touch the flash
> image at all.

Ask them for the sources of U-Boot they use and see for yourself.  I
just checked the current CVS and can't find a "kuro" (or similar)
configuration - but as U-Boot is GPL they have to provide you with the
sources when asked.

Cheers
  Detlev

-- 
Question    : If you were redesigning UNIX, what would you do differently?
Ken Thompson: I'd spell creat with an e.

> Nah.  But I have a contact who knows a LITTLE bit about the board, so I'm
> making progress.

Is this an official contact, or merely an expert user?

I'm very unimpressed by the quality of this product, incidentally. The
only "expert" feature one can really ascribe to it is that it's
shipped without a hard drive and you have to install the drive
yourself. The only documentation included with it, as you know, is a
pointless series of photographs illustrating how to install the drive.
It's an open-source product; it should come with schematics or at the
very least connector pinouts for ALL headers and information on, for
example, the serial protocol between the MPC8241 and the
slave/watchdog micro. Plus even the "turnkey" software that comes with
it is exceedingly flaky.

I am just in the process of hacking up a USB-serial converter as being
the easiest way of bringing that weird inverted 3.3V debug port into
the PC, but my understanding is that U-Boot is configured to boot the
OS off the hard disk if possible, or off the slenderized flash image
if the HDD is missing or unformatted. Is that accurate? It makes my
life easier if this is the case, since I won't have to touch the flash
image at all.

In article <MRfjd.2655$_J2.975@newsread2.news.atl.earthlink.net>,
Lewin A.R.W. Edwards <larwe@larwe.com> wrote:
>Sheesh. I'm glad you posted this reply. I was about to put down my
>credit card for a Kuro (since it's the only thing that comes close to my
>wishlist). I was hoping that support is better for people who've
>actually paid.

Nah.  But I have a contact who knows a LITTLE bit about the board, so I'm
making progress.

>I guess my next step is to beg vendors of PowerPC SBCs for loaner units.

Yup.

What I really want is a vendor with an SBC that has support from more than
two OSs, so I can look at how different development kits work.

-s
-- 
   Copyright 2004, all wrongs reversed.  Peter Seebach / seebs@plethora.net
   http://www.seebs.net/log/ - YA blog.   http://www.seebs.net/ - homepage.
     C/Unix wizard, pro-commerce radical, spam fighter.  Boycott Spamazon!
Consulting, computers, web hosting, and shell access: http://www.plethora.net/

On Sun, 07 Nov 2004 14:37:08 GMT, "Lewin A.R.W. Edwards"
<larwe@larwe.com> wrote:

>> > Linux-based embedded app on x86 and porting it across to a PowerPC
>> > platform. When I was contacted by the people that want these articles, I
>> 
>> There are cheap alternatives, but a little hacking may be required on
>> your side.

He..He

Have a look at Dream Media's DM7000 Set-Top Box , you can even watch
Sattelite while running the Linux :-)


http://forum.tuxbox.org/forum/

Remember its called Dreambox , the dbox2 is another hardware.

Carsten

> > Linux-based embedded app on x86 and porting it across to a PowerPC
> > platform. When I was contacted by the people that want these articles, I
> 
> There are cheap alternatives, but a little hacking may be required on
> your side.
> 
> http://www.gc-linux.org/

I looked at this, but it seems to have all the disadvantages of going
with the Kuro Box and none of the advantages. (Plus, it's a bit informal
for the target audience; that doesn't bother ME, but it could quite
likely bother them).

I'm really looking for something off the shelf. There are dozens of ARM
contenders, it's a mystery why no PowerPC.

On Sat, 06 Nov 2004 12:22:44 +0000, Lewin A.R.W. Edwards wrote:

> I've been asked to write some articles about developing an example
> Linux-based embedded app on x86 and porting it across to a PowerPC
> platform. When I was contacted by the people that want these articles, I
> said that I hadn't worked much with PowerPC because PPC-based SBCs are
> so expensive that they've generally been thrown right out of the race at
> the start. Unfortunately, that still seems to be true.

There are cheap alternatives, but a little hacking may be required on
your side.

http://www.gc-linux.org/

These guys just ported Linux to the Gamecube, which has a 486MHz PPC
and 40 MB of RAM at less than $100. The only problem still unresolved is
the lack of booting capabilities from a standard CD/DVD or memory
card, otherwise it may be a great cheap PPC platform to experiment
on.

Hi,

> >I've been pointed at the Kuro box,
> 
> >1. Lack of detailed documentation. It seems to have very ad-hoc support
> 
> Yes indeedy.  I have been wanting very much to find out what's actually going
> on on this board, or even the pinouts for the serial port, and had no luck.

Sheesh. I'm glad you posted this reply. I was about to put down my
credit card for a Kuro (since it's the only thing that comes close to my
wishlist). I was hoping that support is better for people who've
actually paid.

> I'm pretty much agreeing with this list of criteria; I want one too!  And I,
> too, have had no luck at all.

I can find plenty of boards that meet all the technical criteria, but
they are all at least twice my price cutoff. This is *precisely* why I
have always wound up using x86 and ARM boards in my designs; the cost of
entry for PPC is just too high.

I guess my next step is to beg vendors of PowerPC SBCs for loaner units.

The crazy part is that the company that's commissioning this can most
certainly (and ultimately will) afford to pay for practically anything
you care to name. But the mechanism by which they pay freelance writers
doesn't have hardware budgeted into it.

In article <om3jd.1651$_J2.690@newsread2.news.atl.earthlink.net>,
Lewin A.R.W. Edwards <larwe@larwe.com> wrote:
>I've been pointed at the Kuro box,
><http://penguinppc.org/embedded/kuro/>. The price is ideal, but two
>factors concern me about this appliance:

>1. Lack of detailed documentation. It seems to have very ad-hoc support
>in general, at least here in the US.

Yes indeedy.  I have been wanting very much to find out what's actually going
on on this board, or even the pinouts for the serial port, and had no luck.

>* Must have wired Ethernet, at least one serial interface, and an IDE or
>removable flash memory interface. 4Mb flash minimum. Host-side USB would
>be nice.
>* Flash must be programmable over JTAG with simple wiggler type
>interface, ROMmed serial bootloader or other inexpensive kiss-of-life
>mechanism. Or it can be socketed; I have a very versatile burner.
>* Linux port must be supplied or readily available.
>
>* Video interface - preferably VGA - would be nice but not essential.
>* Performance isn't critical; 40-66MHz is enough.
>* Ideally sub-US$250

>It doesn't have to be a boxed appliance like Kuro, it can be a bare
>board requiring external PSU etc. Size, power requirements, and so on
>are not important at all.

I'm pretty much agreeing with this list of criteria; I want one too!  And I,
too, have had no luck at all.

-s
-- 
   Copyright 2004, all wrongs reversed.  Peter Seebach / seebs@plethora.net
   http://www.seebs.net/log/ - YA blog.   http://www.seebs.net/ - homepage.
     C/Unix wizard, pro-commerce radical, spam fighter.  Boycott Spamazon!
Consulting, computers, web hosting, and shell access: http://www.plethora.net/

Lewin A.R.W. Edwards wrote:

> I've been asked to write some articles about developing an example
> Linux-based embedded app on x86 and porting it across to a PowerPC
> platform. When I was contacted by the people that want these articles, I
> said that I hadn't worked much with PowerPC because PPC-based SBCs are
> so expensive that they've generally been thrown right out of the race at
> the start. Unfortunately, that still seems to be true.
[...]
> Thanks for your erudite recommendations :)
> 
Not sure if it's erudite but have you taken a look at 
http://www.denx.de? AFAIK Wolfgang Denk is rather active at RTAI 
development and I guess at Linux too. I haven't checked their products 
but I guess it is worth a look at.

Regards.
Elder.