Reply by "mpj...@rowley.co.uk [msp430]"●December 4, 20152015-12-04
Hi Peter,
As Paul mentions RAL continue to support MSP430. We also support MSP432 with the
CrossWorks for ARM product. The latest release of this product can be used with
MSP432 devices with a CrossWorks for MSP430 V3 product key i.e. there is no
requirement to purchase an additional license.
Reply by "'Pe...@ozemail.com.au [msp430]"●November 27, 20152015-11-27
Thanks Matthias
-----Original Message-----
From: m... [mailto:m...]
Sent: Friday, 27 November 2015 5:32 PM
To: m...
Subject: [msp430] RE: Choice of compiler for MSP432
"'Peter Grey' m...@ozemail.com.au [msp430]" :
> Paul
>
>
>
> Thanks for the information. I thought there were some issues with you
> supporting this initially or were these all resolved? I will take a
> look at this. Do you want to do any more sales work and explain why
> yours is so good?
>
I am using Crossworks for MSP430 since years, it is quite good. One point is
the much better compiled code compared to gcc based compilers. (but I can
not say something about the MSP432 quality).
Matthias
Posted by: Matthias Weingart
Reply by "Mat...@pentax.boerde.de [msp430]"●November 27, 20152015-11-27
"'Peter Grey' m...@ozemail.com.au [msp430]" :
> Paul
>
>
>
> Thanks for the information. I thought there were some issues with you
> supporting this initially or were these all resolved? I will take a look
> at this. Do you want to do any more sales work and explain why yours is
> so good?
>
I am using Crossworks for MSP430 since years, it is quite good. One point is
the much better compiled code compared to gcc based compilers. (but I can not
say something about the MSP432 quality).
Matthias
Posted by: Matthias Weingart
Reply by "'Pe...@ozemail.com.au [msp430]"●November 26, 20152015-11-26
Paul
Thanks for the information. I thought there were some issues with you supporting
this initially or were these all resolved? I will take a look at this. Do you
want to do any more sales work and explain why yours is so good?
Peter
From: m... [mailto:m...]
Sent: Friday, 27 November 2015 1:03 AM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
And RAL continues with MSP430 support after other vendors have given up.
Regards,
— Paul.
On 26 Nov 2015, at 16:28, Nick Price n...@signatrol.com [msp430]
wrote:
But CrossWorks for the MSP432?
On 26/11/2015 12:39, 'Glenn M' g...@recotech.com.au [msp430] wrote:
I use Crossworks for a good few years. No problems so far.
Glenn
From: m... [mailto:m...]
Sent: Thursday, 26 November 2015 10:42 PM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
Anyone Tride Crossworks
On 24/11/2015 07:28, 'Peter Grey' m...@ozemail.com.au [msp430]
wrote:
I finally got CCS installed. I removed older versions of MSPWare and also did
not enable Simple mode. I can now see Resource Explorer and have gone through
the example of “Out of the Box Experience”.
Thanks
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:33 AM
To: m...
Subject: RE: [msp430] Choice of compiler for MSP432
Thanks Aaron
My problem is just installing it. I am running Windows 7 and downloaded the 32
bit version (64 bit does not seem to be available). I cannot get the TI resource
Explorer to be present for some reason. I installed it to the default
location.
I am just now trying to clear out any past versions or MSPware and see if this
helps.
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:22 AM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
I've had very few problems with the CCS for MSP432. I have, however, had
nothing but headache from IAR and the launchpad JTAG tool. Apparently the TI
drivers are less than wonderful according to the tech support folks at IAR. They
recommend using a stand alone JTAG tool for IAR with the 432 launchpad, which
drove my decision to use CCS. I really hated CCS in the past, so it has been a
pleasant surprise to see it work well. The fit and finish seem to be improved
since my last time using it a few years ago. I have had no problems with
installation on Win7 pro 64.
HTH,
Aaron
On Nov 23, 2015 6:47 PM, "'Peter Grey' m...@ozemail.com.au [msp430]"
wrote:
Can anyone tell me what choices for a C compiler there are with the new MSP432?
I have tried CCS6 but am having problems installing it. IT seems that I am not
the only one.
Thanks
Peter
--
Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
--
Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
Reply by "'Gl...@recotech.com.au [msp430]"●November 26, 20152015-11-26
Sorry, didn’t notice that.
From: m... [mailto:m...]
Sent: Friday, 27 November 2015 3:28 AM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
But CrossWorks for the MSP432?
On 26/11/2015 12:39, 'Glenn M' g...@recotech.com.au [msp430] wrote:
I use Crossworks for a good few years. No problems so far.
Glenn
From: m... [mailto:m...]
Sent: Thursday, 26 November 2015 10:42 PM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
Anyone Tride Crossworks
On 24/11/2015 07:28, 'Peter Grey' m...@ozemail.com.au [msp430]
wrote:
I finally got CCS installed. I removed older versions of MSPWare and also did
not enable Simple mode. I can now see Resource Explorer and have gone through
the example of “Out of the Box Experience”.
Thanks
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:33 AM
To: m...
Subject: RE: [msp430] Choice of compiler for MSP432
Thanks Aaron
My problem is just installing it. I am running Windows 7 and downloaded the 32
bit version (64 bit does not seem to be available). I cannot get the TI resource
Explorer to be present for some reason. I installed it to the default location.
I am just now trying to clear out any past versions or MSPware and see if this
helps.
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:22 AM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
I've had very few problems with the CCS for MSP432. I have, however, had
nothing but headache from IAR and the launchpad JTAG tool. Apparently the TI
drivers are less than wonderful according to the tech support folks at IAR. They
recommend using a stand alone JTAG tool for IAR with the 432 launchpad, which
drove my decision to use CCS. I really hated CCS in the past, so it has been a
pleasant surprise to see it work well. The fit and finish seem to be improved
since my last time using it a few years ago. I have had no problems with
installation on Win7 pro 64.
HTH,
Aaron
On Nov 23, 2015 6:47 PM, "'Peter Grey' m...@ozemail.com.au [msp430]"
wrote:
Can anyone tell me what choices for a C compiler there are with the new MSP432?
I have tried CCS6 but am having problems installing it. IT seems that I am not
the only one.
Thanks
Peter
--
Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
--
Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
[Non-text portions of this message have been removed]
Posted by: "Glenn M"
Reply by "Pau...@rowley.co.uk [msp430]"●November 26, 20152015-11-26
And RAL continues with MSP430 support after other vendors have given up.
Regards,
— Paul.
> On 26 Nov 2015, at 16:28, Nick Price
n...@signatrol.com [msp430] wrote:
>
> But CrossWorks for the MSP432?
>
> On 26/11/2015 12:39, 'Glenn M' g...@recotech.com.au
[msp430] wrote:
>> I use Crossworks for a good few years. No problems so far.
>>
>>
>>
>> Glenn
>>
>>
>>
>> From: m... [mailto:m... ]
>> Sent: Thursday, 26 November 2015 10:42 PM
>> To: m...
>> Subject: Re: [msp430] Choice of compiler for MSP432
>>
>>
>>
>>
>>
>> Anyone Tride Crossworks
>>
>> On 24/11/2015 07:28, 'Peter Grey' m...@ozemail.com.au
[msp430] wrote:
>>
>>
>>
>> I finally got CCS installed. I removed older versions of MSPWare and also did
not enable Simple mode. I can now see Resource Explorer and have gone through
the example of “Out of the Box Experience”.
>>
>>
>>
>> Thanks
>>
>>
>>
>> Peter
>>
>>
>>
>> From: m... [mailto:m... ]
>> Sent: Tuesday, 24 November 2015 11:33 AM
>> To: m...
>> Subject: RE: [msp430] Choice of compiler for MSP432
>>
>>
>> Thanks Aaron
>>
>>
>>
>> My problem is just installing it. I am running Windows 7 and downloaded the
32 bit version (64 bit does not seem to be available). I cannot get the TI
resource Explorer to be present for some reason. I installed it to the default
location.
>>
>>
>>
>> I am just now trying to clear out any past versions or MSPware and see if
this helps.
>>
>>
>>
>> Peter
>>
>>
>>
>> From: m... [mailto:m... ]
>> Sent: Tuesday, 24 November 2015 11:22 AM
>> To: m...
>> Subject: Re: [msp430] Choice of compiler for MSP432
>>
>>
>>
>> I've had very few problems with the CCS for MSP432. I have, however, had
nothing but headache from IAR and the launchpad JTAG tool. Apparently the TI
drivers are less than wonderful according to the tech support folks at IAR. They
recommend using a stand alone JTAG tool for IAR with the 432 launchpad, which
drove my decision to use CCS. I really hated CCS in the past, so it has been a
pleasant surprise to see it work well. The fit and finish seem to be improved
since my last time using it a few years ago. I have had no problems with
installation on Win7 pro 64.
>> HTH,
>> Aaron
>>
>> On Nov 23, 2015 6:47 PM, "'Peter Grey'
m...@ozemail.com.au
[msp430]" > wrote:
>>
>>
>>
>> Can anyone tell me what choices for a C compiler there are with the new
MSP432? I have tried CCS6 but am having problems installing it. IT seems that I
am not the only one.
>>
>>
>>
>> Thanks
>>
>>
>>
>>
>>
>> Peter
>>
>>
>>
>>
>>
>>
>> --
>> Regards
>>
>> Nick Price
>> Technical Manager.
>> Signatrol Ltd.
>> Unit E2, Green Lane Business Park,
>> Tewkesbury,
>> Gloucestershire,
>> GL20 8SJ
>>
>> Tel: +44 (0)1684 299 399
>> www.signatrol.com
>> Registered in England 04973283
>>
>> Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
>>
>> --
> Regards
>
> Nick Price
> Technical Manager.
> Signatrol Ltd.
> Unit E2, Green Lane Business Park,
> Tewkesbury,
> Gloucestershire,
> GL20 8SJ
>
> Tel: +44 (0)1684 299 399
> www.signatrol.com Registered in England
04973283
>
> Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
>
Reply by "Nic...@signatrol.com [msp430]"●November 26, 20152015-11-26
But CrossWorks for the MSP432?
On 26/11/2015 12:39, 'Glenn M' g...@recotech.com.au [msp430] wrote: >
> I use Crossworks for a good few years. No problems so far.
>
> Glenn
>
> *From:*m... [mailto:m...]
> *Sent:* Thursday, 26 November 2015 10:42 PM
> *To:* m...
> *Subject:* Re: [msp430] Choice of compiler for MSP432
>
> Anyone Tride Crossworks
>
> On 24/11/2015 07:28, 'Peter Grey' m...@ozemail.com.au
> [msp430] wrote:
>
> I finally got CCS installed. I removed older versions of MSPWare
> and also did not enable Simple mode. I can now see Resource
> Explorer and have gone through the example of “Out of the Box
> Experience”.
>
> Thanks
>
> Peter
>
> *From:*m...
> [mailto:m...]
> *Sent:* Tuesday, 24 November 2015 11:33 AM
> *To:* m...
> *Subject:* RE: [msp430] Choice of compiler for MSP432
>
> Thanks Aaron
>
> My problem is just installing it. I am running Windows 7 and
> downloaded the 32 bit version (64 bit does not seem to be
> available). I cannot get the TI resource Explorer to be present
> for some reason. I installed it to the default location.
>
> I am just now trying to clear out any past versions or MSPware and
> see if this helps.
>
> Peter
>
> *From:*m...
> [mailto:m...]
> *Sent:* Tuesday, 24 November 2015 11:22 AM
> *To:* m...
> *Subject:* Re: [msp430] Choice of compiler for MSP432
> I've had very few problems with the CCS for MSP432. I have,
> however, had nothing but headache from IAR and the launchpad JTAG
> tool. Apparently the TI drivers are less than wonderful according
> to the tech support folks at IAR. They recommend using a stand
> alone JTAG tool for IAR with the 432 launchpad, which drove my
> decision to use CCS. I really hated CCS in the past, so it has
> been a pleasant surprise to see it work well. The fit and finish
> seem to be improved since my last time using it a few years ago. I
> have had no problems with installation on Win7 pro 64.
> HTH,
> Aaron
>
> On Nov 23, 2015 6:47 PM, "'Peter Grey' m...@ozemail.com.au
> [msp430]"
> > wrote:
>
> Can anyone tell me what choices for a C compiler there are with
> the new MSP432? I have tried CCS6 but am having problems
> installing it. IT seems that I am not the only one.
>
> Thanks
>
> Peter
> --
> Regards
>
> Nick Price
> Technical Manager.
> Signatrol Ltd.
> Unit E2, Green Lane Business Park,
> Tewkesbury,
> Gloucestershire,
> GL20 8SJ
>
> Tel: +44 (0)1684 299 399
> www.signatrol.com Registered in England 04973283
>
> Unless expressly stated otherwise, the information contained in this
> email is confidential and is intended only for the named recipients.
> You must not copy, distribute, or take any action or reliance upon it.
> If you have received this email in error, please notify the sender.
> Any unauthorized disclosure of the information contained in this email
> is strictly prohibited. The information contained in this email may be
> subject to public disclosure under the Freedom of information Act
> 2000. Unless the information is legally exempt from disclosure, the
> confidentiality of this email and your reply cannot be guaranteed.
--
Email from Nick Price @ Signatrol Ltd Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this
email is confidential and is intended only for the named recipients. You
must not copy, distribute, or take any action or reliance upon it. If
you have received this email in error, please notify the sender. Any
unauthorized disclosure of the information contained in this email is
strictly prohibited. The information contained in this email may be
subject to public disclosure under the Freedom of information Act 2000.
Unless the information is legally exempt from disclosure, the
confidentiality of this email and your reply cannot be guaranteed.
Reply by "'Gl...@recotech.com.au [msp430]"●November 26, 20152015-11-26
I use Crossworks for a good few years. No problems so far.
Glenn
From: m... [mailto:m...]
Sent: Thursday, 26 November 2015 10:42 PM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
Anyone Tride Crossworks
On 24/11/2015 07:28, 'Peter Grey' m...@ozemail.com.au [msp430]
wrote:
I finally got CCS installed. I removed older versions of MSPWare and also did
not enable Simple mode. I can now see Resource Explorer and have gone through
the example of “Out of the Box Experience”.
Thanks
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:33 AM
To: m...
Subject: RE: [msp430] Choice of compiler for MSP432
Thanks Aaron
My problem is just installing it. I am running Windows 7 and downloaded the 32
bit version (64 bit does not seem to be available). I cannot get the TI resource
Explorer to be present for some reason. I installed it to the default
location.
I am just now trying to clear out any past versions or MSPware and see if this
helps.
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:22 AM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
I've had very few problems with the CCS for MSP432. I have, however, had
nothing but headache from IAR and the launchpad JTAG tool. Apparently the TI
drivers are less than wonderful according to the tech support folks at IAR. They
recommend using a stand alone JTAG tool for IAR with the 432 launchpad, which
drove my decision to use CCS. I really hated CCS in the past, so it has been a
pleasant surprise to see it work well. The fit and finish seem to be improved
since my last time using it a few years ago. I have had no problems with
installation on Win7 pro 64.
HTH,
Aaron
On Nov 23, 2015 6:47 PM, "'Peter Grey' m...@ozemail.com.au [msp430]"
wrote:
Can anyone tell me what choices for a C compiler there are with the new MSP432?
I have tried CCS6 but am having problems installing it. IT seems that I am not
the only one.
Thanks
Peter
--
Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this email is
confidential and is intended only for the named recipients. You must not copy,
distribute, or take any action or reliance upon it. If you have received this
email in error, please notify the sender. Any unauthorized disclosure of the
information contained in this email is strictly prohibited. The information
contained in this email may be subject to public disclosure under the Freedom of
information Act 2000. Unless the information is legally exempt from disclosure,
the confidentiality of this email and your reply cannot be guaranteed.
Reply by "Nic...@signatrol.com [msp430]"●November 26, 20152015-11-26
Anyone Tride Crossworks
On 24/11/2015 07:28, 'Peter Grey' m...@ozemail.com.au [msp430]
wrote: >
> I finally got CCS installed. I removed older versions of MSPWare and
> also did not enable Simple mode. I can now see Resource Explorer and
> have gone through the example of “Out of the Box Experience”.
>
> Thanks
>
> Peter
>
> *From:*m... [mailto:m...]
> *Sent:* Tuesday, 24 November 2015 11:33 AM
> *To:* m...
> *Subject:* RE: [msp430] Choice of compiler for MSP432
> Thanks Aaron
>
> My problem is just installing it. I am running Windows 7 and
> downloaded the 32 bit version (64 bit does not seem to be available).
> I cannot get the TI resource Explorer to be present for some reason. I
> installed it to the default location.
>
> I am just now trying to clear out any past versions or MSPware and see
> if this helps.
>
> Peter
>
> *From:*m...
> [mailto:m...]
> *Sent:* Tuesday, 24 November 2015 11:22 AM
> *To:* m...
> *Subject:* Re: [msp430] Choice of compiler for MSP432
>
> I've had very few problems with the CCS for MSP432. I have, however,
> had nothing but headache from IAR and the launchpad JTAG tool.
> Apparently the TI drivers are less than wonderful according to the
> tech support folks at IAR. They recommend using a stand alone JTAG
> tool for IAR with the 432 launchpad, which drove my decision to use
> CCS. I really hated CCS in the past, so it has been a pleasant
> surprise to see it work well. The fit and finish seem to be improved
> since my last time using it a few years ago. I have had no problems
> with installation on Win7 pro 64.
> HTH,
> Aaron
>
> On Nov 23, 2015 6:47 PM, "'Peter Grey' m...@ozemail.com.au
> [msp430]"
> > wrote:
>
> Can anyone tell me what choices for a C compiler there are with the
> new MSP432? I have tried CCS6 but am having problems installing it. IT
> seems that I am not the only one.
>
> Thanks
>
> Peter
>
--
Email from Nick Price @ Signatrol Ltd Regards
Nick Price
Technical Manager.
Signatrol Ltd.
Unit E2, Green Lane Business Park,
Tewkesbury,
Gloucestershire,
GL20 8SJ
Tel: +44 (0)1684 299 399
www.signatrol.com
Registered in England 04973283
Unless expressly stated otherwise, the information contained in this
email is confidential and is intended only for the named recipients. You
must not copy, distribute, or take any action or reliance upon it. If
you have received this email in error, please notify the sender. Any
unauthorized disclosure of the information contained in this email is
strictly prohibited. The information contained in this email may be
subject to public disclosure under the Freedom of information Act 2000.
Unless the information is legally exempt from disclosure, the
confidentiality of this email and your reply cannot be guaranteed.
Reply by "'Pe...@ozemail.com.au [msp430]"●November 24, 20152015-11-24
I finally got CCS installed. I removed older versions of MSPWare and also did
not enable Simple mode. I can now see Resource Explorer and have gone through
the example of “Out of the Box Experience”.
Thanks
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:33 AM
To: m...
Subject: RE: [msp430] Choice of compiler for MSP432
Thanks Aaron
My problem is just installing it. I am running Windows 7 and downloaded the 32
bit version (64 bit does not seem to be available). I cannot get the TI resource
Explorer to be present for some reason. I installed it to the default
location.
I am just now trying to clear out any past versions or MSPware and see if this
helps.
Peter
From: m... [mailto:m...]
Sent: Tuesday, 24 November 2015 11:22 AM
To: m...
Subject: Re: [msp430] Choice of compiler for MSP432
I've had very few problems with the CCS for MSP432. I have, however, had
nothing but headache from IAR and the launchpad JTAG tool. Apparently the TI
drivers are less than wonderful according to the tech support folks at IAR. They
recommend using a stand alone JTAG tool for IAR with the 432 launchpad, which
drove my decision to use CCS. I really hated CCS in the past, so it has been a
pleasant surprise to see it work well. The fit and finish seem to be improved
since my last time using it a few years ago. I have had no problems with
installation on Win7 pro 64.
HTH,
Aaron
On Nov 23, 2015 6:47 PM, "'Peter Grey' m...@ozemail.com.au [msp430]"
wrote:
Can anyone tell me what choices for a C compiler there are with the new MSP432?
I have tried CCS6 but am having problems installing it. IT seems that I am not
the only one.