Here is related dmesg output from the VM
[ 32.122516] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
[ 235.240907] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 235.732218] usb 2-1: New USB device found, idVendor51, idProduct0
[ 235.732230] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 235.732238] usb 2-1: Product: MSP-FET430UIF JTAG Tool
[ 235.732244] usb 2-1: Manufacturer: Texas Instruments
[ 235.732250] usb 2-1: SerialNumber: TUSB3410173281D8D755FFC3
[ 236.877013] usbcore: registered new interface driver usbserial
[ 236.878551] usbcore: registered new interface driver usbserial_generic
[ 236.879528] usbserial: USB Serial support registered for generic
[ 236.903984] usbcore: registered new interface driver ti_usb_3410_5052
[ 236.904044] usbserial: USB Serial support registered for TI USB 3410 1
port adapter
[ 236.904090] usbserial: USB Serial support registered for TI USB 5052 2
port adapter
[ 236.904181] ti_usb_3410_5052 2-1:1.0: TI USB 3410 1 port adapter
converter detected
[ 236.911216] usb 2-1: Direct firmware load for ti_usb-v0451-pf430.fw
failed with error -2
[ 238.081540] usb 2-1: USB disconnect, device number 2
[ 238.081574] ti_usb_3410_5052: probe of 2-1:1.0 failed with error -5
Seems that it fails at driver / firmware load. Is there a new firmware for
it?
Thank you.
On Thu, May 25, 2017 at 5:15 PM, μrt wrote:
> Hello,
>
> I have been trying to use EZUSB in a Linux VM using VirtualBbox.
>
> I attach my EZUSB to the vm successfully. But Ubuntu Linux doesn't
detect
> it for some reason.
>
> I tried to use it directly to a Linux box (bypassing the VM) and it works
> fine with mspdebug.
>
> I believe people have tried it in VMWare workstation and player without
> success.
>
> Any pointers?
>
> Thanks.
>
> --
> Cheers,
> μrt
>
--
Cheers,
μrt
