Reply by John F July 25, 20062006-07-25

I'm having a somewhat exotic and esoteric (since hardly anyone would 
use the geven configuration) question:

 I need some hints on synchronizing a Mega16 (8MHz quartz) to the 
Galep 4 using the ISP pinout given in the Galep-Datasheet. Using a 
parallel PonyProg interface it was no problem. But I wanted to do some 
experiments with the Galep. The information in the help system is of 
little help on the operation. I didn't even find anything about the 
fuse-bit conflict (is a set checkbox a 0 or a 1).

I thought that asking the experts here could reveal some of the 
secrets :-)

You can have it:
Quick, Accurate, Inexpensive.
Pick two.