I am wondering if you still have questions about the ENC28J60? If so you
can ask me, I am the designer of that device, every gate inside that IC was
made by me, even the addidition of the "Elvis" on the silicon wafer.
I would love to help anyone using this device, you can email me now at
adam.white32@gmail.com as I am no longer working at Microchip.
-Adam
>
>Hi,
>
>I have a ATMega128 and I want to connect it to internet.
>
>I want to use ENC28j60 as ethernet controller( MAC&PHY ethernet) because
>it has SPI.
>
>I have bought a evaluation board (AT90EIT1) from Atmel and it is really
a
>webserver and is contained ATMega103 and CS8900(an Ethernet
>controller)...
>
>Modular TCP/IP source code for AVR family is on CD of this evaluation
>board . But its ethernet.c file is written to interface with CS8900.
>
>Can any body help me to change this file to interface with ENC28j60?
>
>As I am in hurry, I will be so thankful if you reply me as soon as
>possible.
>
>-thanks.
>
>
Reply by David Kelly●August 4, 20062006-08-04
In article <1154602218.817720.17610@i3g2000cwc.googlegroups.com>,
"xport_google" <mona.fathollahi@gmail.com> wrote:
> I download these file from
> http://tuxgraphics.org/electronics/200606/article06061.shtml, and
> compile them with Imagecraft in widows XP environment.
>
> In compiling I encounter with some errors, because it can't find some
> header files. for example <avr/io.h>, <avr/interrupt.h>..
>
> I think these files shall be compiled in Linux environment. Is it true?
> can you suggest me a source code that can be compiled with Imagecraft?
Considering you started with a Linux-oriented project, that Imagecraft
AVR tools are not available for Linux, maybe you ought to use the tools
the project was developed under? Not talking about Linux but avr-gcc.
http://winavr.sourceforge.net/ is about as painless as it gets.
Reply by xport_google●August 3, 20062006-08-03
I download these file from
http://tuxgraphics.org/electronics/200606/article06061.shtml, and
compile them with Imagecraft in widows XP environment.
In compiling I encounter with some errors, because it can't find some
header files. for example <avr/io.h>, <avr/interrupt.h>..
I think these files shall be compiled in Linux environment. Is it true?
can you suggest me a source code that can be compiled with Imagecraft?
I am eagrly waiting for your answer.
Reply by Don McKenzie●August 2, 20062006-08-02
Stef Mientki wrote:
> Don McKenzie wrote:
>
>> rf_xport wrote:
>>
>>> Hi,
>>>
>>> I have a ATMega128 and I want to connect it to internet.
>>>
>>> I want to use ENC28j60 as ethernet controller( MAC&PHY ethernet) because
>>> it has SPI.
>>>
>>> I have bought a evaluation board (AT90EIT1) from Atmel and it is
>>> really a
>>> webserver and is contained ATMega103 and CS8900(an Ethernet
>>> controller)...
>>>
>>> Modular TCP/IP source code for AVR family is on CD of this evaluation
>>> board . But its ethernet.c file is written to interface with CS8900.
>>>
>>> Can any body help me to change this file to interface with ENC28j60?
>>>
>>> As I am in hurry, I will be so thankful if you reply me as soon as
>>> possible.
>>>
>>> -thanks.
>>
>>
>> just got off a page about the ENC28j60 and interfacing to Atmel chips.
>> there may be something there to help you.
>>
>> Don...
>>
>>
>>
> do you have a link perhaps ?
>
> I'm building a TCP/IP stack for 16F877 in JAL,
> and have some weird problems, (see also weird tricks in uChip's TCP/IP
> stack)
> so I'm interested in every solution to get the ENC28J60 working correctly.
>
> cheers,
> Stef Mientki
> rf_xport wrote:
>
>> Hi,
>>
>> I have a ATMega128 and I want to connect it to internet.
>>
>> I want to use ENC28j60 as ethernet controller( MAC&PHY ethernet) because
>> it has SPI.
>>
>> I have bought a evaluation board (AT90EIT1) from Atmel and it is really a
>> webserver and is contained ATMega103 and CS8900(an Ethernet
>> controller)...
>>
>> Modular TCP/IP source code for AVR family is on CD of this evaluation
>> board . But its ethernet.c file is written to interface with CS8900.
>>
>> Can any body help me to change this file to interface with ENC28j60?
>>
>> As I am in hurry, I will be so thankful if you reply me as soon as
>> possible.
>>
>> -thanks.
>
> just got off a page about the ENC28j60 and interfacing to Atmel chips.
> there may be something there to help you.
>
> Don...
>
>
>
do you have a link perhaps ?
I'm building a TCP/IP stack for 16F877 in JAL,
and have some weird problems, (see also weird tricks in uChip's TCP/IP
stack)
so I'm interested in every solution to get the ENC28J60 working correctly.
cheers,
Stef Mientki
Reply by Don McKenzie●August 2, 20062006-08-02
rf_xport wrote:
> Hi,
>
> I have a ATMega128 and I want to connect it to internet.
>
> I want to use ENC28j60 as ethernet controller( MAC&PHY ethernet) because
> it has SPI.
>
> I have bought a evaluation board (AT90EIT1) from Atmel and it is really a
> webserver and is contained ATMega103 and CS8900(an Ethernet
> controller)...
>
> Modular TCP/IP source code for AVR family is on CD of this evaluation
> board . But its ethernet.c file is written to interface with CS8900.
>
> Can any body help me to change this file to interface with ENC28j60?
>
> As I am in hurry, I will be so thankful if you reply me as soon as
> possible.
>
> -thanks.
Hi,
I have a ATMega128 and I want to connect it to internet.
I want to use ENC28j60 as ethernet controller( MAC&PHY ethernet) because
it has SPI.
I have bought a evaluation board (AT90EIT1) from Atmel and it is really a
webserver and is contained ATMega103 and CS8900(an Ethernet
controller)...
Modular TCP/IP source code for AVR family is on CD of this evaluation
board . But its ethernet.c file is written to interface with CS8900.
Can any body help me to change this file to interface with ENC28j60?
As I am in hurry, I will be so thankful if you reply me as soon as
possible.
-thanks.