> Ref voltage, you can't change it, it is your Vdd.
>
> yes i have tried with that also but the code is not running for my application but i m able to simulate it well by triggering it myself but it doesn't take input fro sensor can u suggest something
Reply by An Schwob in the USA●August 16, 20062006-08-16
abhay wrote:
> hi , i m using philips microcontroller and want to interface its A/D
> converter to my application
> temp. sensor (lm35).i m doing this on devlopment kit of philips
> p89lpc935 . can anyone suggest any prerequisites for that?let me tell
> you i have already filled its contol registers.i have tried this with
> edge triggered & immediate starting mode.but unable to get the result
> on lcd.there is no prob with lcd as i m able to get display for my
> other applications.let me know if i m lacking any point somewhere. also
> how m i to deal with ref. voltage of A/D as it is embedded and i cant
> find to set its configuration anywhere or any register.
Hi,
did you try the configuration tool from www.esacademy.com ?
http://www.codearchitect.org/
Ref voltage, you can't change it, it is your Vdd.
An Schwob
Reply by abhay●August 15, 20062006-08-15
hi , i m using philips microcontroller and want to interface its A/D
converter to my application
temp. sensor (lm35).i m doing this on devlopment kit of philips
p89lpc935 . can anyone suggest any prerequisites for that?let me tell
you i have already filled its contol registers.i have tried this with
edge triggered & immediate starting mode.but unable to get the result
on lcd.there is no prob with lcd as i m able to get display for my
other applications.let me know if i m lacking any point somewhere. also
how m i to deal with ref. voltage of A/D as it is embedded and i cant
find to set its configuration anywhere or any register.