Reply by mjames_doveridge November 16, 20112011-11-16
>
> Somebody can help me?
>

'I don't own IAR Embedded Workbench or J-Link JTAG interface as
presupposed.'

You are trying to get a web server working without a debugger.

Just don't. The experienced developers here can't event get a LED to flash first time, (well, I can't anyway:). Get a debugger.

Rgds,
Martin

An Engineer's Guide to the LPC2100 Series

Reply by Tedy November 15, 20112011-11-15
Hello Everyone!

I have problems to run the example codes (uIP webserver) from Olimex
http://www.olimex.com/dev/lpc-p2378.html
. on my LPC2378-Board.

Actually i make some improvisation to load this codes to my controller.
I don't own IAR Embedded Workbench or J-Link JTAG interface as
presupposed. firstl i tried to download the free version of IAR and did
a HEX.File as a output file with it. Finally i loaded this HEX.File with
Flash Magic into my controller.

After making same changing on the IP-Address and on the mask to make the
same subnetz on my PC, i get this message on my console window, wenn i
make Ping-instruction : Request timed out.

So, my device doesn't answer my request from PC after loading this
HEX-File.

Somebody can help me?