Hi Hian,
On Mon, 2012-02-06 at 19:38 +0000, hschew00 wrote:
> On Datasheet, all these voltage has nominal at
3.3V
> Will I loose ADC's or DAC's accuracy if
> 1) VDDA is a little higher than VDD due to separate regulators?
No.
> 2) VREF is a little higher than VDDA if for whatever
reason VREF != VDDA?
I would always make sure that Vref is the same level as or
a bit lower then Vdda.
The lsb stepsize will be a bit larger but you will
still have 1024 steps between 0V and +Vref.
lsb = +Vref / 1024 (when Vssa = 0V)
roelof