I downloaded Flash Magic and it does support both the UART and CAN bootloader
modes. I'm very happy! For CAN it needs a PEAK PCAN interface though - so I
will have to get one of those.
Cheers,
Kevin.
--- In l..., "cfbsoftware1" wrote: >
> I don't know about CAN but FlashMagic supports programming of LPC11Cxx
parts via UART:
>
> http://www.flashmagictool.com/supporteddevices.html
>
> Regards,
> Chris Burrows
--- In l..., "Kevin" wrote: >
> Hello,
>
> Can anyone point me at a PC utility to program the LPC11Cxx parts via CAN (and
optionally UART) using the built-in ISP bootloader?
>
UM Chapter '26.6 C_CAN communication protocol' describes SDO
communication with C_CAN bootloader.
So every CAN device can use this protocol to flash LPC11Cxx, even a LPC11C24.
AFAIK there's no free PC tool which is doing that via USB & LPC.
Reply by Kevin●October 8, 20122012-10-08
A quick look in the device selection list of flash magic makes me think that
those lpc's can be programmed via CAN.
--- In l..., "cfbsoftware1" wrote: >
> --- In l..., "Kevin" wrote:
> >
> > Can anyone point me at a PC utility to program the LPC11Cxx parts via CAN
(and optionally UART) using the built-in ISP bootloader?
> > I don't know about CAN but FlashMagic supports programming of LPC11Cxx
parts via UART:
>
> http://www.flashmagictool.com/supporteddevices.html
>
> Regards,
> Chris Burrows
>
> --
> Astrobe v4.2: Oberon Language IDE for Cortex-M3
> http://www.astrobe.com
>
Reply by cfbsoftware1●October 8, 20122012-10-08
--- In l..., "Kevin" wrote: >
> Can anyone point me at a PC utility to program the LPC11Cxx parts via CAN (and
optionally UART) using the built-in ISP bootloader?
>
I don't know about CAN but FlashMagic supports programming of LPC11Cxx
parts via UART: