Hi Cosmin, It's great u also experienced this. Could u tell me abit more how u overcomed this? What do u mean by saying Buy a BDM? Look forward to ur reply, Tuan, --- In , "Cosmin Giurgiu" <cosmingiurgiu@h...> wrote: > Hello, > I have the same problem with M68HC912C32EVB.. Buy a BDM ... > Regards > cosming > > ----- Original Message ----- > From: a2vutuan > To: > Sent: Wednesday, February 11, 2004 6:49 PM > Subject: [68HC12] Codewarrior and Motorola SDI, BDM port > Hi, > I'm using M68HC912B32EVB. I've been trying to use Motorola SDI as an > interface between my EVB and Codewarrior. But the Codewarrior > Dubugger can't detect my EVB. It keeps on saying that "Target not > ready or not connected on COM2" when I do "Set Target". > My connection is like this: > [COM2 of PC] -> SDI -> [BDM port of EVB]. > I also installed a jumper on the pin 3,4 of J51 of the SDI as > instructed in the manual, this is to use standard supply for the > SDI. And mine is Codewarrior Studio Special Edition only. > I've seen that lots of people can use BDM port, hopefully you can > have me out of this. Thanks alot. > VT > |