Reply by Andrzej Ekiert●September 27, 20062006-09-27
Hi all,
I have released under GPL some code that some of you might find useful.
1) fconfig
It is a Linux application to read and modify RedBoot configuration. I
created it when I needed to synchronize Linux configuration (MAC and IP
addresses, UART baudrate, etc.) with RedBoot config.
2) ee24
It is a Linux MTD driver (kernel 2.6.x) for 24XX series of I2C eeproms.
It supports EEPROMs with 16-bit addresses (e.g. Microchip's 24LC512),
but could easly be adapted to work with other chips, if someone cares to
do it ;-)
Here is the link: http://andrzejekiert.ovh.org/software.html.en
Both apps have been tested with Snapgear Embedded Linux running kernel
2.6 on a custom board, IXP425-based.
Hope this code will help someone.
Comments welcome.
Andrzej Ekiert
FUT: comp.os.linux.embedded