Willy Jacobs ha scritto:
> Francesco Moscato wrote:
>> Sorry,
>> Does someone know if there is a way to install a linux-based operating
>> system on the following board?
>>
>> SBC PowerQuicc II 8260 Wind River Board (with an MPC 8260 processor)
>>   
> Start with U-boot (http://*u-boot*.sourceforge.net/) and ELDK
> (http://www.denx.de).
> U-boot supports already this board (sbc8260), so running a 2.4 or 2.6
> should not be a big problem.
> 
tks .. i will try ;)

Francesco Moscato wrote:
> Sorry, 
>
> Does someone know if there is a way to install a linux-based operating
> system on the following board?
>
> SBC PowerQuicc II 8260 Wind River Board 
> (with an MPC 8260 processor)
>   
Start with U-boot (http://*u-boot*.sourceforge.net/) and ELDK 
(http://www.denx.de).
U-boot supports already this board (sbc8260), so running a 2.4 or 2.6 
should not be a big problem.

-- 
willy

Sorry, 

Does someone know if there is a way to install a linux-based operating
system on the following board?

SBC PowerQuicc II 8260 Wind River Board 
(with an MPC 8260 processor)


Thank you 
Francesco

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----