i just have released lpc21isp version 1.91 which includes
- support for LPC8xx
- support for LPC18xx
- support for LPC43xx
- a lot bug fixes and changes by various people
Reply by Wouter van Ooijen●June 26, 20132013-06-26
> there is not yet a final version of lpc21isp released
for lpc810. I post this here, when a version supporting lpc810 is available.
Thanks. If you need at tester....
:)
Wouter
Reply by Wouter van Ooijen●June 26, 20132013-06-26
> There is an lpc21isp group here on Yahoo. Updated
sources are available over there.
Latest update there is december 2012, with no LPC800 support.
Wouter
Reply by capiman26061973●June 26, 20132013-06-26
Hello all,
> There is an lpc21isp group here on Yahoo.
> Updated sources are available over there.
there is not yet a final version of lpc21isp released for lpc810.
I post this here, when a version supporting lpc810 is available.
Best regards,
Martin
Reply by rtstofer●June 26, 20132013-06-26
--- In l..., Wouter van Ooijen wrote: >
> Has anyone adapted lpc21isp for the lpc800 series (specifically lpc810)
> yet? Out of necessity I am using FlashMagic now, bit it is a PITA that I
> can't download+start-terminal from the command line.
>
> Wouter
>
There is an lpc21isp group here on Yahoo. Updated sources are available over
there.
Richard
Reply by Wouter van Ooijen●June 26, 20132013-06-26
Has anyone adapted lpc21isp for the lpc800 series (specifically lpc810)
yet? Out of necessity I am using FlashMagic now, bit it is a PITA that I
can't download+start-terminal from the command line.
Wouter
Reply by suse auto●June 26, 20132013-06-26
Hello Group,
I am using a development board with LPC2129. I downloaded the sample code
i.e BlinkyCAN which came along with Kiel and Jlink package.
The sample code is able to send and receive the CAN messages. However, if I
put the breakpoint in Receive interrupt, the break point is never hit. May
I know the reason?
Can I any give me a sample code which has got simple CAN receive interrupt
ans transmit function.
Regards,
Hareesha
[Non-text portions of this message have been removed]