What openocd version are you using and can you share your config files
for target and interface?
On 6.1.2014 6:58, Milind Kakati wrote: > I used gdb + openocd + jlink it works in Ubuntu
12.04, but only after
> updating the jlink firmware.
>
> Bye,
> MIlind
>
> On Saturday, January 4, 2014 8:46 PM, Mario Ivancic
> wrote:
> Is this possible?
> I'm trying to make it work on Windows XP and OpenOCD 0.7.0 using JLink
> 8.0 (actually SAM-ICE 8.0) and no success yet.
>
> I'm using this config:
>
> interface jlink
> transport select swd
> swd_mode 2
> swd_delay 2
>
> And every time I get error that transport is already selected:
>
> Info : only one transport option; autoselect 'jtag'
> Error: session's transport is already selected.
> Runtime Error: embedded:startup.tcl:20:
> in procedure 'script'
> at file "embedded:startup.tcl", line 58
> in procedure 'transport' called at file "jlink.cfg", line 12
> in procedure 'ocd_bouncer'
> at file "embedded:startup.tcl", line 20
>
> Best regards,
> Mario
>
I used gdb + openocd + jlink it works in Ubuntu 12.04, but only after updating
the jlink firmware.
Bye,
MIlind
On Saturday, January 4, 2014 8:46 PM, Mario Ivancic wrote:
Is this possible?
I'm trying to make it work on Windows XP and OpenOCD 0.7.0 using JLink
8.0 (actually SAM-ICE 8.0) and no success yet.
I'm using this config:
interface jlink
transport select swd
swd_mode 2
swd_delay 2
And every time I get error that transport is already selected:
Info : only one transport option; autoselect 'jtag'
Error: session's transport is already selected.
Runtime Error: embedded:startup.tcl:20:
in procedure 'script'
at file "embedded:startup.tcl", line 58
in procedure 'transport' called at file "jlink.cfg", line 12
in procedure 'ocd_bouncer'
at file "embedded:startup.tcl", line 20
Best regards,
Mario
Reply by Mario Ivancic●January 4, 20142014-01-04
Is this possible?
I'm trying to make it work on Windows XP and OpenOCD 0.7.0 using JLink
8.0 (actually SAM-ICE 8.0) and no success yet.
I'm using this config:
interface jlink
transport select swd
swd_mode 2
swd_delay 2
And every time I get error that transport is already selected:
Info : only one transport option; autoselect 'jtag'
Error: session's transport is already selected.
Runtime Error: embedded:startup.tcl:20:
in procedure 'script'
at file "embedded:startup.tcl", line 58
in procedure 'transport' called at file "jlink.cfg", line 12
in procedure 'ocd_bouncer'
at file "embedded:startup.tcl", line 20