Reply by k b shah \lascaux\●March 6, 20052005-03-06
Gentlemen,
I am interested in building and using JTAG with my philips LPC2294 ...
Any help ...schematic, driver...???
Based on the e-mail in this group, I would like to use it for debugging using
Insight/GDB...
Thanks in advance.
----- Original Message -----
From: Leon Heller
To:
Sent: Tuesday, February 22, 2005 2:50 AM
Subject: Re: [lpc2000] software for connecting to target with wiggler interface
----- Original Message -----
From: "Raj, GS" <>
To: <>; <>
Sent: Tuesday, February 22, 2005 7:41 AM
Subject: RE: [lpc2000] software for connecting to target with wiggler
interface
>
> Leon,
>
> Is it latest OCD commander software or older version you have used.
My interface works with the latest software. The schematic and PCB in
jtag.zip were updated with the connection between pins 8 and 15 on the
DB-25.
----- Original Message -----
From: "Raj, GS" <>
To: <>; <>
Sent: Tuesday, February 22, 2005 7:41 AM
Subject: RE: [lpc2000] software for connecting to target with wiggler
interface
>
> Leon,
>
> Is it latest OCD commander software or older version you have used.
My interface works with the latest software. The schematic and PCB in
jtag.zip were updated with the connection between pins 8 and 15 on the
DB-25.
Leon
--
Reply by Leon Heller●February 22, 20052005-02-22
----- Original Message -----
From: "kenbnny" <>
To: <>
Sent: Tuesday, February 22, 2005 4:59 AM
Subject: [lpc2000] software for connecting to target with wiggler interface
>
>
> HEy Guys,
>
> I made up a Wiggler Interface device as given in files in jtag.zip. I
> have LPC2138 as target device.
>
> Now can some one tell me which exact software i need to use to talk
> to target. I tried using "Macraigor OCD Commander ocd_dbgr.exe"
for
> connecting to the target. But I always get "Error Response from
> INITIALIZE: 0x03 initialize_target : cable disconnected (10 :
> 03)" error.
>
> Would be great if someone let me know what software and instruction
> for talking to the target with "Wiggler Interface".
I actually used OCD Commander for testing that interface, and it definitely
works with my LPC2106 system.
Leon
--
Reply by kenbnny●February 22, 20052005-02-22
HEy Guys,
I made up a Wiggler Interface device as given in files in jtag.zip. I
have LPC2138 as target device.
Now can some one tell me which exact software i need to use to talk
to target. I tried using "Macraigor OCD Commander ocd_dbgr.exe" for
connecting to the target. But I always get "Error Response from
INITIALIZE: 0x03 initialize_target : cable disconnected (10 :
03)" error.
Would be great if someone let me know what software and instruction
for talking to the target with "Wiggler Interface".