Hi,

I should be able to help you on this. I have over two decades of
experience in developing state-of-the-art technologies in DSP, FPGA,
Video, Embedded Systems etc and with 15 years of experience in India
on these technologies, though for last 8 years I have been in the
Silicon valley. I know very well the industries there. Send me details
via e-mail if you are interested (vrms22@yahoo.com)

VRMS


searchfordesignservices@hotmail.com (Anom) wrote in message news:<671a04d4.0410220739.8d21b45@posting.google.com>...
> Hi,
> 
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
> 
> All tips are welcome.
> 
> Best Regards,
> Anom

This is not what you asked for - these guys are in the US.  They've
done a good job for me in the past.  They have experience with these
sorts of designs and parts:

www.bostondesignsolutions.com

Chris

searchfordesignservices@hotmail.com (Anom) wrote in message news:<671a04d4.0410220739.8d21b45@posting.google.com>...
> Hi,
> 
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
> 
> All tips are welcome.
> 
> Best Regards,
> Anom

"TheDoc" <TheDoc@ev1.net> wrote in message news:<10nlji0rrd8rr14@corp.supernews.com>...
> "Anom" <searchfordesignservices@hotmail.com> wrote in message
> news:671a04d4.0410220739.8d21b45@posting.google.com...
> > Hi,
> >
> > For a quite large project dealing with Virtex 4, DDR2, gigabit
> > ethernet and digital signal processing, I'm looking for a top of the
> > bill design house in a far east country like india.
> >
> > All tips are welcome.
> >
> > Best Regards,
> > Anom
> 
> They dont exist.. and the one's you deal with will cost you more in the
> final
> analysis than if you had it done properly here or in europe..

They exists, but not cheap.  Low skill labor costs in China/India are
USD$1 per hour.  High skill labor costs are over USD$10 per hour, plus
another USD$5 management/government fees.  Another consideration is
that unless you are planning on open-source, there is no way to
protect your invested IP.

"Anom" <searchfordesignservices@hotmail.com> wrote in message
news:671a04d4.0410220739.8d21b45@posting.google.com...
> Hi,
>
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
>
> All tips are welcome.
>
> Best Regards,
> Anom

They dont exist.. and the one's you deal with will cost you more in the
final
analysis than if you had it done properly here or in europe..

On 22 Oct 2004 08:39:39 -0700, searchfordesignservices@hotmail.com
(Anom) wrote:

>For a quite large project dealing with Virtex 4, DDR2, gigabit
>ethernet and digital signal processing, I'm looking for a top of the
>bill design house in a far east country like india.
>
>All tips are welcome.

Following recent (second hand) experience of designs
done in India my tip is; try Australia then Europe or the
USA, in that order :)

Mike Harding

searchfordesignservices@hotmail.com (Anom) wrote :

> Hi,
> 
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
> 
> All tips are welcome.

tip one - avoid India and China



Pozdrawiam.
-- 
RusH   //
 http://randki.o2.pl/profil.php?id_r=352019
Like ninjas, true hackers are shrouded in secrecy and mystery.
You may never know -- UNTIL IT'S TOO LATE.

Hi,

For a quite large project dealing with Virtex 4, DDR2, gigabit
ethernet and digital signal processing, I'm looking for a top of the
bill design house in a far east country like india.

All tips are welcome.

Best Regards,
Anom