>With 2 MB Flash / 8 MB RAM uClinux should be happy as well as uC/OS.
Yes you can run uClinux but the uCOS stuff is twice as fast 1/4th the size,
and there are not GPL issues.
>Do you already support the CAN module of the 5234 with a piece of software?
We provide a low level software interface to send and receive CAN messages.
We have a number of partners that provide higher level CAN softwar drivers.
>What makes it unique, compared with the IGW/900 ?
It's 2.5 times as fast. (147 Mhz vs 66).
We provide a complete set of RTOS, TCP/IP and software tools.
We include deployment tools that allow your customer to easily setup IP addreses,
update code in the field etc...
We publish our prices. (I could not find a published price for the IGW900)
Our price is $239 in singles down to $129 Q1000
Our CB34 development kit is $299 with software and tools.
If you want a 5282 based design and are willing to put the CAN driver chip on your own board
we go down to $79 in 1K. See out MOD5282
Paul,
You don't specify anything about the physical layer of CAN.
Neither on
http://www.netburner.com/products/can_to_ethernet/cb34ex.html
nor on
http://www.netburner.com/downloads/cb34ex/CB34EX_datasheet_connector_descriptions.pdf
With 2 MB Flash / 8 MB RAM uClinux should be happy as well as uC/OS.
Do you already support the CAN module of the 5234 with a piece of software?
What makes it unique, compared with the IGW/900 ?
--
with best regards / mit freundlichen Gr��en
Heinz-J�rgen Oertel
+===========================================================
| http://www.port.de
| http://www.CAN-Wiki.info/
+===================================================================
Merokok dapat menyebabkan kanker, serangan jantung,
impotensi dan gangguan kehamilan dan janin.