We are working to add the feature which allow to program separately
each Flash block, the new setup will come out soon. If you register
your inDART-HCS12 version at the Softec Microsystems web site a free
newsletter will inform you about new releases. Here is the link:
Nicola Ciot
SofTec Microsystems
Technical Support
www.softecmicro.com
--- In , Nam SungHyun <namsh@k...> wrote: > Hello,
>
> I use 9S12E64 and internal flash for Booter and external flash for
> application. Because there's no data EEPROM, Application uses
> internal flash area (1sector) for NVM data.
>
> Currently I use softec InDART BlazeProgrammer, and it seems it
> only support mass erase. So, If I want to update Booter,
> Application's NVM datas are also erased.
>
> Is there any programmer I can use for this environment?
> I want to erase only Booter area when I upgrade Booter.
>
> regards,
> namsh
Reply by Steve-HighPoint●March 11, 20042004-03-11
You might look at Prog12Z programming from P&E microsystems. You can do
what you are asking and you can also set up an init file or run it from the
command line to automate some of the commands required to only erase parts of
the memory.
Good Luck
Steve
----- Original Message -----
From: Nam SungHyun
To: 68HC12
Sent: Thursday, March 11, 2004 2:51 AM
Subject: [68HC12] HCS12 flash programmer
Hello,
I use 9S12E64 and internal flash for Booter and external flash for
application. Because there's no data EEPROM, Application uses
internal flash area (1sector) for NVM data.
Currently I use softec InDART BlazeProgrammer, and it seems it
only support mass erase. So, If I want to update Booter,
Application's NVM datas are also erased.
Is there any programmer I can use for this environment?
I want to erase only Booter area when I upgrade Booter.
I use 9S12E64 and internal flash for Booter and external flash for
application. Because there's no data EEPROM, Application uses
internal flash area (1sector) for NVM data.
Currently I use softec InDART BlazeProgrammer, and it seems it
only support mass erase. So, If I want to update Booter,
Application's NVM datas are also erased.
Is there any programmer I can use for this environment?
I want to erase only Booter area when I upgrade Booter.