Reply by tonalbuilder2002 March 15, 20052005-03-15

Hello, starting to layout a LPC2214 board with 2 SRAM packages, 2
FLASH packages, and several other peripherals on the bus.

LPC2214 docs don't seem to require small series resistors on the
address or data lines, which are a common requirement on other
processors with similar bus speeds. I wonder if anybody has contrary
opinions, or if anyone has seen ugly bus signals on their
oscilloscope?

Thanks!

Bill T.
http://www.kupercontrols.com


An Engineer's Guide to the LPC2100 Series