NOR flash/SRAM are moved around , so it appears in a diff address
....
Some times things appear in 2 places ....
I like the ATMEL doc's on ARM ...
__________________________________________________________________
wanwan wrote:
> I'm programming an ARM7 microcontroller with embedded C using an IDE.
> Everything works fine initially after loading the program. When I press
> soft reset, the interrupts stop working.
>
> I tried the example codes for the microcontroller that involve
> interrupts and had the same results: works for the first time after
> loading and stops working after soft reset.
>
> Is there anything different running the program after initial load than
> running the program after soft reset? I have all the registers set
> properly in the main function as far as I know. The example codes also
> look fine to me, but have the same problem after soft reset
>
> If anyone knows how I can solve this problem, please let me know.
Reply by wanwan●December 15, 20062006-12-15
I'm programming an ARM7 microcontroller with embedded C using an IDE.
Everything works fine initially after loading the program. When I press
soft reset, the interrupts stop working.
I tried the example codes for the microcontroller that involve
interrupts and had the same results: works for the first time after
loading and stops working after soft reset.
Is there anything different running the program after initial load than
running the program after soft reset? I have all the registers set
properly in the main function as far as I know. The example codes also
look fine to me, but have the same problem after soft reset
If anyone knows how I can solve this problem, please let me know.