>>I have integrated MPLAB 5.70.40 with HI-TECH PICC compiler v8.02
>>PL1 but failed.When I only compiled just a simple .c file,it appear
>>this message:MPLAB is unable to find output file "DELAY.HEX".
>>This may be due to a compile, assemble, or link process
>>failure.Here is all I have done:
>>1.Click on the Option menu in the mehu bar, and select Environment
>>setup,in this new dialog box,I have setted Default language suite to
>>HI-TECH PICC.
>>2.Click on the Project menu in the menu bar,and select Install Language
>>Tool,in here,I have setted the location of the compiler,assembler and
>>linker of the HI-TECH compiler that I have installed.The executable for
>>all three tools(compiler/assembler/linker) is setted to picc.exe.
>>3.I have added two environment variable showed below:
>>HTC_ERR_FORMAT=Error[000] %f %l : %s
>>HTC_WARN_FORMAT=Warning[000] %f %l : %s
>>Even I have done above step,but it also not success.
>>How to solve this problem?I am using MPLAB-ICD not MPLAB-ICD2,so
>>please don't advise me to use MPLAB v6.xx.
>>Any help will very appreciate!
>>
>
>
> I also had problems using fairly new versions of PICC with older versions of
> MPLAB. Like you, I wanted to use an ICD1. In the end, I was forced to give up.
> I now use the latest versions of MPLAB and PICC and I bought an ICD2. I would
> advise you to do the same, as it will save you a lot of time. I am almost
> certain that you cannot use your version 8 PICC with MPLAB 5.x Even if you get
> it to compile, you will have problems debugging.
>
There is a workaraound for this problem. You can compile your project with
MPLAB V6.xx and use MPLAB V5.xx with the ICD for debugging. Setting
breakpoints in C sourcecode works in V5.xx.
Markus
Reply by Ppelectron●October 15, 20042004-10-15
>I have integrated MPLAB 5.70.40 with HI-TECH PICC compiler v8.02
>PL1 but failed.When I only compiled just a simple .c file,it appear
>this message:MPLAB is unable to find output file "DELAY.HEX".
>This may be due to a compile, assemble, or link process
>failure.Here is all I have done:
>1.Click on the Option menu in the mehu bar, and select Environment
>setup,in this new dialog box,I have setted Default language suite to
>HI-TECH PICC.
>2.Click on the Project menu in the menu bar,and select Install Language
>Tool,in here,I have setted the location of the compiler,assembler and
>linker of the HI-TECH compiler that I have installed.The executable for
>all three tools(compiler/assembler/linker) is setted to picc.exe.
>3.I have added two environment variable showed below:
>HTC_ERR_FORMAT=Error[000] %f %l : %s
>HTC_WARN_FORMAT=Warning[000] %f %l : %s
>Even I have done above step,but it also not success.
>How to solve this problem?I am using MPLAB-ICD not MPLAB-ICD2,so
>please don't advise me to use MPLAB v6.xx.
>Any help will very appreciate!
>
I also had problems using fairly new versions of PICC with older versions of
MPLAB. Like you, I wanted to use an ICD1. In the end, I was forced to give up.
I now use the latest versions of MPLAB and PICC and I bought an ICD2. I would
advise you to do the same, as it will save you a lot of time. I am almost
certain that you cannot use your version 8 PICC with MPLAB 5.x Even if you get
it to compile, you will have problems debugging.
Reply by Bruce Sam●October 15, 20042004-10-15
I have integrated MPLAB 5.70.40 with HI-TECH PICC compiler v8.02
PL1 but failed.When I only compiled just a simple .c file,it appear
this message:MPLAB is unable to find output file "DELAY.HEX".
This may be due to a compile, assemble, or link process
failure.Here is all I have done:
1.Click on the Option menu in the mehu bar, and select Environment
setup,in this new dialog box,I have setted Default language suite to
HI-TECH PICC.
2.Click on the Project menu in the menu bar,and select Install Language
Tool,in here,I have setted the location of the compiler,assembler and
linker of the HI-TECH compiler that I have installed.The executable for
all three tools(compiler/assembler/linker) is setted to picc.exe.
3.I have added two environment variable showed below:
HTC_ERR_FORMAT=Error[000] %f %l : %s
HTC_WARN_FORMAT=Warning[000] %f %l : %s
Even I have done above step,but it also not success.
How to solve this problem?I am using MPLAB-ICD not MPLAB-ICD2,so
please don't advise me to use MPLAB v6.xx.
Any help will very appreciate!