I got the source-forge code to work with the wriggler to read and write
memory. That was all I needed to do and it worked ok. Very slow through
a wriggler so with a raven it should be a bit quicker...
From: valdef78 [mailto:valdef@vald...]
Sent: Sunday, 3 April 2005 2:19 AM
Subject: [lpc2000] Re: gdb-jtag-arm
--- In lpc2000@lpc2..., "larry_amontec" <larry_amontec@y...>
> Hi all,
> Are there guys using gdb-jtag-arm from Tobias Lorenz ?
> Do you have any advice about this ?
> If the gdb-jtag-arm was successfully tested by some of you, I will
> re-write the jtag.c, to be able to use gdb-jtag-arm socket with the
> raven jtag interface.
> Let me know,
here are the links I just found for it :
Yahoo! Groups Links
This email is confidential and intended solely for the use of the individual to
whom it is addressed.
Any views or opinions presented are solely those of the author and do not
necessarily represent those of NAUTRONIX LTD.
If you are not the intended recipient, you have received this email in error and
use, dissemination, forwarding, printing, or copying of this email is strictly
prohibited. If you have received this email in error please contact the sender.
Although our computer systems use active virus protection software, and we take
various measures to reduce the risk of viruses being transmitted in e-mail
messages and attachments sent from this company, we cannot guarantee that such
e-mail messages and attachments are free from viruses on receipt. It is a
condition of our using e-mail to correspond with you, that any and all liability
on our part arising directly or indirectly out of any virus is excluded. Please
ensure that you run virus checking software on all e-mail messages and
attachments before reading them.