On 2007-02-21, Surya <aswingopalan@gmail.com> wrote:
>
> I am developing an FPGA application which works in series with a main
> processor which is running an RTOS(VxWorks). Since my inputs and
> outputs are to and from that processor, should i be using any RTOS?

Only the person who is writing the application code can decided
whether it would benefit from using an RTOS. So you tell us,
will you benefit from an RTOS?

-- 
Grant Edwards                   grante             Yow!  Yow! Is my fallout
                                  at               shelter termite proof?
                               visi.com            

Surya wrote:
> I am developing an FPGA application which works in series with a main
> processor which is running an RTOS(VxWorks). Since my inputs and
> outputs are to and from that processor, should i be using any RTOS?

That depends on factors besides the FPGA.  A possible impact is the 
maximum latency to service an I/O request, which an RTOS could make 
better or worse.

-- 
Thad

I am developing an FPGA application which works in series with a main
processor which is running an RTOS(VxWorks). Since my inputs and
outputs are to and from that processor, should i be using any RTOS?

Kindly clarify. thanks in advance.

Regards
Surya.