Reply by ●March 12, 20072007-03-12
On Mar 12, 5:50 pm, "linnix" <m...@linnix.info-for.us> wrote:


> Generally, you can do roughly:
>
> 1. 20KHz with AVR
> 2. 50KHz with MSP
> 3. 100KHz with ARM
>
> Your maximum signal frequency is half of the above.
> Namely, 25KHz max for MSP430F1612.


Interesting numbers.
Thanks.

Marius Hancu
Reply by linnix ●March 12, 20072007-03-12
On Mar 12, 2:00 pm, Marius.Ha...@gmail.com wrote:

> On Mar 12, 3:07 pm, CBFalconer <cbfalco...@yahoo.com> wrote:
>
> > Insufficient information.  Audio can range from 40 hz to about 17
> > khz or more.  You don't specify the accuracy needed.  You may well
> > need to measure both period and frequency.  You may need to average
> > multiple measurements.  You don't even specify the length of sample
> > you have.
>
> Averaging over 10 or more periods should be possible.
>
> Thank you all.
> Marius Hancu


If you are measuring single tone, zero crossing would be fine.
Otherwise, you have to A2D the signal and FFT it.
In that case, the A2D sampling rate is important.
Generally, you can do roughly:

1. 20KHz with AVR
2. 50KHz with MSP
3. 100KHz with ARM

Your maximum signal frequency is half of the above.
Namely, 25KHz max for MSP430F1612.
Reply by ●March 12, 20072007-03-12
On Mar 12, 3:07 pm, CBFalconer <cbfalco...@yahoo.com> wrote:


> Insufficient information.  Audio can range from 40 hz to about 17
> khz or more.  You don't specify the accuracy needed.  You may well
> need to measure both period and frequency.  You may need to average
> multiple measurements.  You don't even specify the length of sample
> you have.


Averaging over 10 or more periods should be possible.

Thank you all.
Marius Hancu
Reply by CBFalconer ●March 12, 20072007-03-12
Marius Hancu wrote:

> 
> Would appreciate comments/suggestions on methods for measuring the
> period of an audio-range signal with MSP430 (specifically
> MSP430F1612), with the highest resolution allowed by this MCU,
> especially if you have direct experience with that.


Insufficient information.  Audio can range from 40 hz to about 17
khz or more.  You don't specify the accuracy needed.  You may well
need to measure both period and frequency.  You may need to average
multiple measurements.  You don't even specify the length of sample
you have.

-- 
Chuck F (cbfalconer at maineline dot net)
   Available for consulting/temporary embedded and systems.
   <http://cbfalconer.home.att.net>


-- 
Posted via a free Usenet account from http://www.teranews.com
Reply by Grant Edwards ●March 12, 20072007-03-12
On 2007-03-12, larwe <zwsdotcom@gmail.com> wrote:

> On Mar 12, 8:29 am, Marius Hancu <NOS...@videotron.ca> wrote:
>
>> Would appreciate comments/suggestions on methods for measuring the
>> period of an audio-range signal with MSP430 (specifically MSP430F1612),
>
> What is the nature of the signal? If it is a simple waveform, feed it
> into a zero crossing detector and use a timer clocked off MCLK to
> measure the distance between pulses.


That's exactly how I do it on an MSP430.

-- 
Grant Edwards                   grante             Yow!  The SAME WAVE keeps
                                  at               coming in and COLLAPSING
                               visi.com            like a rayon MUU-MUU...
Reply by larwe ●March 12, 20072007-03-12
On Mar 12, 8:29 am, Marius Hancu <NOS...@videotron.ca> wrote:


> Would appreciate comments/suggestions on methods for measuring the
> period of an audio-range signal with MSP430 (specifically MSP430F1612),


What is the nature of the signal? If it is a simple waveform, feed it
into a zero crossing detector and use a timer clocked off MCLK to
measure the distance between pulses.
Reply by Marius Hancu ●March 12, 20072007-03-12
Hello:

Would appreciate comments/suggestions on methods for measuring the 
period of an audio-range signal with MSP430 (specifically MSP430F1612), 
with the highest resolution allowed by this MCU, especially if you have 
direct experience with that.

Thanks.
Marius Hancu