>Anton Erasmus wrote:
>
>> Just because the answer to the ultimate question is 42 does not mean
>> that the problem is on line 42. Since the OP did not ask the ultimate
>> question, I believe that the answer lies in fixing line 3.
>
>Hmmm... following that line of reasoning, we'll immediately need a new
>designated answer for "What's 6 multiplied by 7?", since, this not being
>the ultimate question, its answer shouldn't be 42, right? That's going
>to be somewhat tricky to explain to teachers worldwide ;->
I do not think it would be do much of a problem since the whole earth
was built as a computing entity to find the ultimate question. Any
teacher who finds this whole thing contradictory, is not part of the
computing entity, hence MUST be alien. :)
Regards
Anton Erasmus
Reply by Gordon Freeman●April 3, 20072007-04-03
On Apr 3, 6:57 pm, Ico <use...@zeev.nl> wrote:
> Gordon Freeman <gordonfreeman1...@gmail.com> wrote:
> > I'm designing filter system called IIR filter on the FPGA kit, but it
> > doesn't work when I implement on FPGA. When i iput the signals, the
> > output results seem to not get any thing. I do not know whether my
> > source code is wrong or another reason. The FPGA kit operate normally
> > with other sources which i loaded in the past.
>
> > Can anyone give me some advices to test what parts in my project do
> > not work or give me some idea to test anything. I am in the mess. I
> > hope everyone can show me.
>
> The above mail gives me the feeling that you do not really understand
> the technology you are using. Debugging such a situation should not be
> too hard if you grasp how the different parts work. If something is 'not
> working' from end to end, just take a look at what's happening in the
> middle of the process; predict what kind of signal or behaviour you
> would expect at that place, then measure and see if things match.
>
> You did not give much information about your project, but I'd suggest
> adding some code to output the signal at various stages of the process:
> just after the A/D converter (if you are using one), just before the IIR
> block, etc.
>
> --
> :wq
> ^X^Cy^K^X^C^C^C^C
Hi everyone!
Thank you for your reply!
I used ModelSim to simulate. The result is the same when I canculate
by calculator.
But when I implement on FPGA, it don't work too.
I design IIR filter with 10 orders. I use Matlab to generate
coefficients for filter (b(k) and a(k)). For coefficient "b", I
multiply with 2^14 and multiply with 2^5 for coefficent "a". After
that I round them. These coefficients stored in LUT. I use SDA for
filter. Because I think IIR filter include tow FIR filter. One filter
with coefficient "b" and one with coefficient "a". Is it right?
Reply by ●April 3, 20072007-04-03
Anton Erasmus wrote:
> Just because the answer to the ultimate question is 42 does not mean
> that the problem is on line 42. Since the OP did not ask the ultimate
> question, I believe that the answer lies in fixing line 3.
Hmmm... following that line of reasoning, we'll immediately need a new
designated answer for "What's 6 multiplied by 7?", since, this not being
the ultimate question, its answer shouldn't be 42, right? That's going
to be somewhat tricky to explain to teachers worldwide ;->
Reply by Anton Erasmus●April 3, 20072007-04-03
On Tue, 03 Apr 2007 14:42:59 -0400, CBFalconer <cbfalconer@yahoo.com>
wrote:
>Gordon Freeman wrote:
>>
>> I'm designing filter system called IIR filter on the FPGA kit,
>> but it doesn't work when I implement on FPGA. When i iput the
>> signals, the output results seem to not get any thing. I do not
>> know whether my source code is wrong or another reason. The FPGA
>> kit operate normally with other sources which i loaded in the
>> past.
>>
>> Can anyone give me some advices to test what parts in my project
>> do not work or give me some idea to test anything. I am in the
>> mess. I hope everyone can show me.
>
>Fix line 42
>
Just because the answer to the ultimate question is 42 does not mean
that the problem is on line 42. Since the OP did not ask the ultimate
question, I believe that the answer lies in fixing line 3.
Anton Erasmus
Reply by Grant Edwards●April 3, 20072007-04-03
On 2007-04-03, CBFalconer <cbfalconer@yahoo.com> wrote:
> Gordon Freeman wrote:
>>
>> I'm designing filter system called IIR filter on the FPGA kit,
>> but it doesn't work when I implement on FPGA. When i iput the
>> signals, the output results seem to not get any thing. I do not
>> know whether my source code is wrong or another reason. The FPGA
>> kit operate normally with other sources which i loaded in the
>> past.
>>
>> Can anyone give me some advices to test what parts in my project
>> do not work or give me some idea to test anything. I am in the
>> mess. I hope everyone can show me.
>
> Fix line 42
The problem is he's actually _missing_ line 42. He went from 41
right on to 43. It's probably on the floor underneath his
workbench...
--
Grant Edwards grante Yow! I feel partially
at hydrogenated!
visi.com
Reply by CBFalconer●April 3, 20072007-04-03
Gordon Freeman wrote:
>
> I'm designing filter system called IIR filter on the FPGA kit,
> but it doesn't work when I implement on FPGA. When i iput the
> signals, the output results seem to not get any thing. I do not
> know whether my source code is wrong or another reason. The FPGA
> kit operate normally with other sources which i loaded in the
> past.
>
> Can anyone give me some advices to test what parts in my project
> do not work or give me some idea to test anything. I am in the
> mess. I hope everyone can show me.
Gordon Freeman <gordonfreeman1983@gmail.com> wrote:
> I'm designing filter system called IIR filter on the FPGA kit, but it
> doesn't work when I implement on FPGA. When i iput the signals, the
> output results seem to not get any thing. I do not know whether my
> source code is wrong or another reason. The FPGA kit operate normally
> with other sources which i loaded in the past.
>
> Can anyone give me some advices to test what parts in my project do
> not work or give me some idea to test anything. I am in the mess. I
> hope everyone can show me.
The above mail gives me the feeling that you do not really understand
the technology you are using. Debugging such a situation should not be
too hard if you grasp how the different parts work. If something is 'not
working' from end to end, just take a look at what's happening in the
middle of the process; predict what kind of signal or behaviour you
would expect at that place, then measure and see if things match.
You did not give much information about your project, but I'd suggest
adding some code to output the signal at various stages of the process:
just after the A/D converter (if you are using one), just before the IIR
block, etc.
--
:wq
^X^Cy^K^X^C^C^C^C
Reply by Gordon Freeman●April 3, 20072007-04-03
hi people,
I'm designing filter system called IIR filter on the FPGA kit, but it
doesn't work when I implement on FPGA. When i iput the signals, the
output results seem to not get any thing. I do not know whether my
source code is wrong or another reason. The FPGA kit operate normally
with other sources which i loaded in the past.
Can anyone give me some advices to test what parts in my project do
not work or give me some idea to test anything. I am in the mess. I
hope everyone can show me.
I am looking forward hearing from people soon,