On Apr 18, 5:51 pm, jcomeau_ictx <john.com...@gmail.com> wrote:
> Actually the AT90S2313 board but with an ATTINY2313 processor. I can
> program it with PonyProg2000 and the accompanying parallel port
> adapter, but am wondering if anyone here has used the same adaptor to
> communicate with the board. The memory dump shows it has a test menu
> already built-in. Or do I need to use RS232 to talk to it? Thanks -- jc

I need an RS232 connection. Had to disassemble it to figure it out.

Actually the AT90S2313 board but with an ATTINY2313 processor. I can
program it with PonyProg2000 and the accompanying parallel port
adapter, but am wondering if anyone here has used the same adaptor to
communicate with the board. The memory dump shows it has a test menu
already built-in. Or do I need to use RS232 to talk to it? Thanks -- jc