Reply by soren_t_hansen May 2, 20052005-05-02
I've bought a Olimex JTAG and after having pacthed it (connected pin 8
& 15) O'm now able to connect to my LPC2138 with OCDRemote. But the
problem is, that I'm only able to connect at speed 8, and when I try
to debug, I keep getting errors and the debugging newer starts.

Does anyone, have any experience with this Olimex Jtag/OCDRemote/GDB
combo, especially at speeds higher than 8?

Best Regards
Sen Hansen

An Engineer's Guide to the LPC2100 Series