On May 18, 6:08 am, sureshkumar.vi...@gmail.com wrote:
> 1.can u tell me how can i retrieve data through UART port which is
> send by other client system(PC).i want to acess data which is send by
> the client(PC).i worked using getchar() but i am not retreiving
> data.please give me the procedure for retreiving the data from UART
> which is send from other PC in the simulator mode for processor
> Lpc2148 using keil compiler

Did you try read()? I think getchar() is line-oriented (cooked).

Of course, you need to make sure your speed, parity, flow control are
the same too. Man termios, and/or look at the source from minicom or
similar open-source software.

Dear madam/sir,
  my project is a communication domain project.my application is to
process the data that is received through UART port from other PC.
Madam  i established communication between Uart port and com port of
PC using assign debug command.I am able to send data through Uart
port.

1.can u tell me how can i retrieve data through UART port which is
send by other client system(PC).i want to acess data which is send by
the client(PC).i worked using getchar() but i am not retreiving
data.please give me the procedure for retreiving the data from UART
which is send from other PC in the simulator mode for processor
Lpc2148 using keil compiler

but when i am myself giving the input in the serial window iam
retriving data

please reply this doubt
thanking you madam/sir,
v.suresh kumar