> Is there any standard procedure to test the functionality of ADC, like
> memory testing.
None that I know of, the analog world is much too diverse to
standardise.
One has to figure out whether and how to do it on a per case
basis.
For example, in a medical device I recently designed I had
both control over a synthesized analog output and the ADC
readback of it; that makes it easy.
In other devices, where the input is unknown and switching
input to some inbuilt known source would be too costly
because of technical or financial reasons - or both - testing
may be just impossible, or hard to do, like observing some
sane behaviour pattern etc.
Dimiter
------------------------------------------------------
Dimiter Popoff Transgalactic Instruments
http://www.tgi-sci.com
------------------------------------------------------
On May 23, 11:47 am, Nutty <nutty.saw...@gmail.com> wrote:
> Hello to all,
>
> I m working on the wireless product which is having the DSP, ADC, WLAN
> chipset, LCD, ect. Now as a part of this project, i m working on the
> Power ON Self diagnostic test for all the major components.
> In our project the ADC is not yet finalised but it is 16 bit SAR type.
> Is there any standard procedure to test the functionality of ADC, like
> memory testing. Could any one please refer some information in
> regards.
>
> Thanks in advance.
>
> Nutty