Reply by rashid husain●September 23, 20042004-09-23
application note AN718 might be useful. I did it, and
worked well.
rashid
--- Bennet Williams <> wrote:
> Does anyone have or know of a source for good
PID
> control code
> (written in C) for the PIC. I intend to do drive
> motor speed control
> with a 16F876A using the built-in PWM hardware.
>
> Thanks,
>
> BRW
_______________________________
Reply by Carlos A. Marcano V.●September 23, 20042004-09-23
Hi fellow.
This is not exactly what you are looking for but will give you a good
starting point.
Reply by Bennet Williams●September 23, 20042004-09-23
Does anyone have or know of a source for good PID control code
(written in C) for the PIC. I intend to do drive motor speed control
with a 16F876A using the built-in PWM hardware.