On Thu, 20 Jan 2005 20:28:04 -0500, "js1180" <spastula@comcast.net>
wrote:
>I am trying to find the ROM based flash routines for a HC08QT4. I found the
>application notes for flash routines in ROM for several other versions of
>the HC08 but not the QT4. The ones listed do not point to any op-codes.
>There are several JMP codes in the ROM but I don't know what they are for.
>
>Maybe there are no flash routines in ROM for the QT4 and I will just have to
>write the routines myself. I was trying to save room on the mpu. Does anyone
>know of any ROM routines on the QT4?
I've used the routines in a QY4, I believe they are the same as the
QT4.
Get a copy of AN1831 if you haven't already. That note was written
before they made the Qxy products, but is otherwise directly
applicable. The routines are the same.
Motorola support provided me with the following table (cut and pasted
from the email):
MCU's -> GR8 KX8 JL3/ JB8 GT16/ QY4..
JK3 GT8 QT1
===============================================
GETBYTE $1C99 $1000 $FC00 $FC00 $1B50 $2800
RDVRRNG $1CAD $1003 $FC03 $FC03 $1B53 $2803
ERARNGE $1DA0 $1006 $FC06 $FC06 $1B56 $2806
PRGRNGE $1CEC $1009 $FC09 $FC09 $1B59 $2809
DELNUS $1D96 $100C $FC0C $FC0C $1B5C $280C
ICGTRIM $1330 $1B5F $280F
ICGTEST $1369. $1B62 $2812
which doesn't line up on my screen, but I think you can figure it out.
RAM, of course, starts at 0x80.
HTH,
-=Dave
-=Dave
--
Change is inevitable, progress is not.
Reply by js1180●January 20, 20052005-01-20
I am trying to find the ROM based flash routines for a HC08QT4. I found the
application notes for flash routines in ROM for several other versions of
the HC08 but not the QT4. The ones listed do not point to any op-codes.
There are several JMP codes in the ROM but I don't know what they are for.
Maybe there are no flash routines in ROM for the QT4 and I will just have to
write the routines myself. I was trying to save room on the mpu. Does anyone
know of any ROM routines on the QT4?