On Jul 11, 6:14 am, "madhurag" <madhu...@cse.iitk.ac.in> wrote:
> Friends,
>
> I am a newbie to the world of embedded systems. So please bear to read
> this long message. I have a at91sam9261ek in which I have successfully
> ported u-boot and linux (after compiling their source code which I have
> downloaded from Linux Link by TimeSys).
>
> Now i wish to connect a smart card (ISO 7816) to it. From the atmel
> documentation, I understand that I have to connect it using USART in which
> SCK will be connected to Clock pin of smart card and TXD will act as I/O.
> But I am not clear about other pins like Vcc, Reset etc.
>
> So essentially I request you to help me with a connection diagram of smart
> card to the micro controller using USART.
>
> A quick reply will be highly appreciated.
>
> Thanks,
> madhurag
If a quick reply is important, learn how to use a search engine.
Google for either "smart card pinout" or "smart card interface" and
you will find all your answers.
Reply by madhurag●July 11, 20072007-07-11
Friends,
I am a newbie to the world of embedded systems. So please bear to read
this long message. I have a at91sam9261ek in which I have successfully
ported u-boot and linux (after compiling their source code which I have
downloaded from Linux Link by TimeSys).
Now i wish to connect a smart card (ISO 7816) to it. From the atmel
documentation, I understand that I have to connect it using USART in which
SCK will be connected to Clock pin of smart card and TXD will act as I/O.
But I am not clear about other pins like Vcc, Reset etc.
So essentially I request you to help me with a connection diagram of smart
card to the micro controller using USART.
A quick reply will be highly appreciated.
Thanks,
madhurag