"Chris Hills" <chris@phaedsys.org> wrote in message
news:bx7MQHDg62lGFAbO@phaedsys.demon.co.uk...
> In article <5fnp63F3csnauU1@mid.individual.net>, Not Really Me
> <scott@validatedQWERTYsoftware.?.?.XYZZYcom.invalid> writes
>>Does anyone have a current PC-lint configuration file (.lnt) to use with
>>IAR
>>Embedded workbench for ARM?
>
> Try www.gimpel.com ?
>
>
> --
> \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
> \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
> /\/\/ chris@phaedsys.org www.phaedsys.org \/\/\
> \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
>
>
>
Thanks to both for the answers. I have used the version on the Gimpel site,
but it isn't sufficient. It certainly could be that I am missing the right
processor setting, but I am getting messages like the following:
--- Module: ..\src\bsp.c (C)
_
#error "<yvals.h> compiled with wrong (version of IAR) compiler"
C:\Program Files\IAR Systems\Embedded Workbench 4.0\arm\inc\yvals.h 45
Error
309: #error "<yvals.h> compiled with wrong (version of IAR) compiler"
It is probably related to the wrong __TID__ setting, but I have been unable
to figure out what the correct one is. This is for an Atmel AT91SAM9261.
Scott
Reply by Chris Hills●July 13, 20072007-07-13
In article <5fnp63F3csnauU1@mid.individual.net>, Not Really Me
<scott@validatedQWERTYsoftware.?.?.XYZZYcom.invalid> writes
>Does anyone have a current PC-lint configuration file (.lnt) to use with IAR
>Embedded workbench for ARM?
Try www.gimpel.com ?
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
/\/\/ chris@phaedsys.org www.phaedsys.org \/\/\
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by Tom Lucas●July 13, 20072007-07-13
"Tom Lucas" <news@REMOVE_tlcs_THIS_dot_TO_fsnet_REPLY_dot_co.uk> wrote
in message news:1184324953.63956.0@demeter.uk.clara.net...
> "Not Really Me" <scott@validatedQWERTYsoftware...XYZZYcom> wrote in
> message news:5fnp63F3csnauU1@mid.individual.net...
>> Does anyone have a current PC-lint configuration file (.lnt) to use
>> with IAR Embedded workbench for ARM?
>>
>> Scott
>
> I believe line already comes with one. Check out co-iar.lnt in the lnt
> directory.
ahem,
I believe *lint* already comes with one. Long week...
Reply by Tom Lucas●July 13, 20072007-07-13
"Not Really Me" <scott@validatedQWERTYsoftware...XYZZYcom> wrote in
message news:5fnp63F3csnauU1@mid.individual.net...
> Does anyone have a current PC-lint configuration file (.lnt) to use
> with IAR Embedded workbench for ARM?
>
> Scott
I believe line already comes with one. Check out co-iar.lnt in the lnt
directory.
Reply by Not Really Me●July 12, 20072007-07-12
Does anyone have a current PC-lint configuration file (.lnt) to use with IAR
Embedded workbench for ARM?
Scott