I have found out that the D-Bug12 software/firmware, once loaded onto
a board, such as the GP256 T board can be used as a programmer(BDM
pod), for anyone that was curious about this.
You can get all the information on the motorola website, you will
need a motorola login to get access to the dbub12 s19 files tho, the
circuit for using it as a pod can be found in the T board schematic.
--- In , "tech_e_micro" <balbr001@i...> wrote: > I have been using an old Atmel 8535 chip - ABC
miniBoard for a while > now and I thought it might be time to move up. I
am looking into
> developing systems with HCS12 and would like to be able to program a > 9S12DP256 via RS232 comms or parallel port from
the PC without the
> need for purchasing a module to do the programming. ie I would like
> the ISP/BDM to be on the controller board itself.
>
> If I am right the AN2153 application note describes a method for
> programming the HCS12 via comms without the need for an external
> module. Does anyone know a way to program the HCS12 initially via
> comms without an external BDM module? Does anyone have a
> circuit/code/PC program lying around that I can use to program the
> HCS12?
>
> Maybe someone has circuits/firmware for a homemade bootloader.
>
> Hints also appreciated! :D
Reply by Doron Fael●June 27, 20042004-06-27
Some of the new HCS12 mask sets arrive with a bootloader already programmed
into a portion of the device FLASH. This allows loading your own
application code through SCI (RS232) or CAN, and program it in the internal
FLASH and EEPROM.
I don't know many details, but I know this exists. It is intended for a
cheap production solution (to program the Flash and EEPROM during
production using SCI or CAN).
Hope this helps,
Doron
Nohau Corporation
HC12 In-Circuit Emulators
www.nohau.com/emul12pc.html
At 10:54 27/06/2004 +0000, you wrote: >I have been using an old Atmel 8535 chip - ABC
miniBoard for a while
>now and I thought it might be time to move up. I am looking into
>developing systems with HCS12 and would like to be able to program a
>9S12DP256 via RS232 comms or parallel port from the PC without the
>need for purchasing a module to do the programming. ie I would like
>the ISP/BDM to be on the controller board itself.
>
>If I am right the AN2153 application note describes a method for
>programming the HCS12 via comms without the need for an external
>module. Does anyone know a way to program the HCS12 initially via
>comms without an external BDM module? Does anyone have a
>circuit/code/PC program lying around that I can use to program the
>HCS12?
>
>Maybe someone has circuits/firmware for a homemade bootloader.
>
>Hints also appreciated! :D
>Yahoo! Groups Links
>
>
Reply by tech_e_micro●June 27, 20042004-06-27
I just realised i already have debug12 from motorola website :P
--- In , "tech_e_micro" <balbr001@i...> wrote: > What programs can be used to program the HCS12
once i have Debug12
> programmed?
>
> Also, where can I download Debug12 version 4? how much is your BDM? I > am in adelaide.
>
> --- In , Peter Lissenburg <peter@s...> wrote:
> > Hi,
> > I would suggest you download Debug12 version 4 as this has > the
> > bootloader s19 file. However you will have to program the chip via > a BDM of
> > some form.
> > I stock the Elektronikladen Motorola range of products in Australia, > > http://www.elektronikladen.de/en_index.html
you could use a
> compod12 to do
> > it. Or if you have some hardware, I could program it for you.
> > (I'm near Melbourne.)
> >
> > Hope that helps.
> > Peter L.
> >
> >
> > At 10:54 AM 27/06/2004 +0000, you wrote:
> > >I have been using an old Atmel 8535 chip - ABC miniBoard for a
> while
> > >now and I thought it might be time to move up. I am looking
into
> > >developing systems with HCS12 and would like to be able to program > a
> > >9S12DP256 via RS232 comms or parallel port from the PC without the > > >need for purchasing a module to do the
programming. ie I would like > > >the ISP/BDM to be on the controller board
itself.
> > >
> > >If I am right the AN2153 application note describes a method
for
> > >programming the HCS12 via comms without the need for an
external
> > >module. Does anyone know a way to program the HCS12 initially
via
> > >comms without an external BDM module? Does anyone have a
> > >circuit/code/PC program lying around that I can use to program the > > >HCS12?
> > >
> > >Maybe someone has circuits/firmware for a homemade bootloader.
> > >
> > >Hints also appreciated! :D
> > >
> > >
> > >
> > >
> > >
> > >Yahoo! Groups Links
> > >
> > >
> > >
> > >
Reply by tech_e_micro●June 27, 20042004-06-27
What programs can be used to program the HCS12 once i have Debug12
programmed?
Also, where can I download Debug12 version 4? how much is your BDM? I
am in adelaide.
--- In , Peter Lissenburg <peter@s...> wrote: > Hi,
> I would suggest you download Debug12 version 4 as this has the > bootloader s19 file. However you will have to
program the chip via a BDM of > some form.
> I stock the Elektronikladen Motorola range of products in Australia,
> http://www.elektronikladen.de/en_index.html you could use a compod12 to do > it. Or if you have some hardware, I could program
it for you.
> (I'm near Melbourne.)
>
> Hope that helps.
> Peter L.
> At 10:54 AM 27/06/2004 +0000, you wrote:
> >I have been using an old Atmel 8535 chip - ABC miniBoard for a while > >now and I thought it might be time to move up.
I am looking into
> >developing systems with HCS12 and would like to be able to program a > >9S12DP256 via RS232 comms or parallel port
from the PC without the
> >need for purchasing a module to do the programming. ie I would like
> >the ISP/BDM to be on the controller board itself.
> >
> >If I am right the AN2153 application note describes a method for
> >programming the HCS12 via comms without the need for an external
> >module. Does anyone know a way to program the HCS12 initially via
> >comms without an external BDM module? Does anyone have a
> >circuit/code/PC program lying around that I can use to program the
> >HCS12?
> >
> >Maybe someone has circuits/firmware for a homemade bootloader.
> >
> >Hints also appreciated! :D
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
Reply by Peter Lissenburg●June 27, 20042004-06-27
Hi,
I would suggest you download Debug12 version 4 as this has the
bootloader s19 file. However you will have to program the chip via a BDM of
some form.
I stock the Elektronikladen Motorola range of products in Australia, http://www.elektronikladen.de/en_index.html you could use a compod12 to do
it. Or if you have some hardware, I could program it for you.
(I'm near Melbourne.)
Hope that helps.
Peter L.
At 10:54 AM 27/06/2004 +0000, you wrote: >I have been using an old Atmel 8535 chip - ABC
miniBoard for a while
>now and I thought it might be time to move up. I am looking into
>developing systems with HCS12 and would like to be able to program a
>9S12DP256 via RS232 comms or parallel port from the PC without the
>need for purchasing a module to do the programming. ie I would like
>the ISP/BDM to be on the controller board itself.
>
>If I am right the AN2153 application note describes a method for
>programming the HCS12 via comms without the need for an external
>module. Does anyone know a way to program the HCS12 initially via
>comms without an external BDM module? Does anyone have a
>circuit/code/PC program lying around that I can use to program the
>HCS12?
>
>Maybe someone has circuits/firmware for a homemade bootloader.
>
>Hints also appreciated! :D
>Yahoo! Groups Links
>
>
Reply by tech_e_micro●June 27, 20042004-06-27
I have been using an old Atmel 8535 chip - ABC miniBoard for a while
now and I thought it might be time to move up. I am looking into
developing systems with HCS12 and would like to be able to program a
9S12DP256 via RS232 comms or parallel port from the PC without the
need for purchasing a module to do the programming. ie I would like
the ISP/BDM to be on the controller board itself.
If I am right the AN2153 application note describes a method for
programming the HCS12 via comms without the need for an external
module. Does anyone know a way to program the HCS12 initially via
comms without an external BDM module? Does anyone have a
circuit/code/PC program lying around that I can use to program the
HCS12?
Maybe someone has circuits/firmware for a homemade bootloader.