|
Velja, You may want to try a different baud rate for your communication.. In the Setting menu, try to change the communication baud rate to 7680 or 1187 Baud. Good luck. Regards. Jean ----- Original Message ----- From: "Velja" <> To: <>; <> Sent: Sunday, March 09, 2003 5:33 AM Subject: [m68HC11] Problem with Jbug11 > Hi, > > I have a problem in communication between PC (duron 1.3GHz) and 68HC11 (E1 > and F1). After bootloader loaded every command brake communication and > program ask me to reboot board. Changing down CPU speed with "Turbo" program > does not give any effect . I try two board and situation is indentical . > > Velja > To unsubscribe from this group, send an email to: > > > ">http://docs.yahoo.com/info/terms/ |