Reply by Gene S. Berkowitz●August 26, 20072007-08-26
In article <1187731489.018698.193500@d55g2000hsg.googlegroups.com>,
peter.pippinger@gmx.de says...
> Hello NG,
>
> i have the SAM7-P256 DEV-Board from Olimex.
>
> But if i open and compile the mmc demo - it doesn=B4t work.
> http://www.olimex.com/dev/soft/arm/SAM7/MMC.zip
>
> Is there something i have to change after downloading it?
>
> Thanks for any help.
>
> Regards,
> Peter
A quick glance shows that all chip select (CS_LOW()/CS_HIGH()) commands
are commented out in MMC.c.
It certainly will not work without a proper CS.
--Gene
Reply by Peter Pippinger●August 21, 20072007-08-21
Hello NG,
i have the SAM7-P256 DEV-Board from Olimex.
But if i open and compile the mmc demo - it doesn=B4t work.
http://www.olimex.com/dev/soft/arm/SAM7/MMC.zip
Is there something i have to change after downloading it?
Thanks for any help.
Regards,
Peter