On Tuesday 21 June 2005 16:09, chetan s rao wrote: > well i was able to get the interrupt from the WDT
but i am not
> able to acknowledge the same i.e. when the watchdog interrupt
> occurred i displayed a value through UART.But the value was
> continuously displayed.
I think you toggle the watchdog. This will restart the time
measurements. After the next timeout you get a new interrupt.
--
Steffen Rose
well i was able to get the interrupt from the WDT but i am not able to
acknowledge the same i.e. when the watchdog interrupt occurred i displayed a
value through UART.But the value was continuously displayed.
the source code is as follows:-
Chetan
On Tue, 21 Jun 2005 misstero wrote : >Hi,
>Please show your source code to do this.
>Suriyan.
>--- In lpc2000@lpc2..., "seeessarr" <csr1981@r...> wrote:
>> hi everybody
>>
>> well i am trying to explore the WDT in LPC 2129.
>> I am displaying a hex value through UART when WDT generates the
>> interrupt.
>> but iam not able to get interrupt .
>> can any one tell me how to do this
>>
>> thanks
>Yahoo! Groups Links
>To br>
>.
>
Reply by misstero●June 21, 20052005-06-21
Hi,
Please show your source code to do this.
Suriyan.
--- In lpc2000@lpc2..., "seeessarr" <csr1981@r...> wrote: > hi everybody
>
> well i am trying to explore the WDT in LPC 2129.
> I am displaying a hex value through UART when WDT generates the
> interrupt.
> but iam not able to get interrupt .
> can any one tell me how to do this
>
> thanks
Reply by seeessarr●June 20, 20052005-06-20
hi everybody
well i am trying to explore the WDT in LPC 2129.
I am displaying a hex value through UART when WDT generates the
interrupt.
but iam not able to get interrupt .
can any one tell me how to do this