>
>
>
> Hi, Can anyone advise me if I can use my Olimex USB
> MAXQ2000 JTAG programmer to program ARM microcontrollers?.
> The 10 pin connector would have to have a 20 pin adapter made
> to match up the JTAG signals correctly. Internally it contains a
> FTDI FT232BM, a LCX244 and a DS89C430 micro if that's any help.
>
> tia
> Mark
> Hi, Can anyone advise me if I can use my Olimex USB
> MAXQ2000 JTAG programmer to program ARM microcontrollers?.
> The 10 pin connector would have to have a 20 pin adapter made
> to match up the JTAG signals correctly. Internally it contains a
> FTDI FT232BM, a LCX244 and a DS89C430 micro if that's any help.
>
> tia
> Mark
the ARM-USB-OCD and the other USB JTAGs supported by the OpenOCD or Rowley's
CrossWorks use the FT2232, and I doubt that's compatible with the MAXQ2000
JTAG.
Regards,
Dominic
Reply by Mark Harriss●September 2, 20072007-09-02
Hi, Can anyone advise me if I can use my Olimex USB
MAXQ2000 JTAG programmer to program ARM microcontrollers?.
The 10 pin connector would have to have a 20 pin adapter made
to match up the JTAG signals correctly. Internally it contains a
FTDI FT232BM, a LCX244 and a DS89C430 micro if that's any help.
tia
Mark