Reply by Chris Hills September 16, 20072007-09-16
Hi D. V. Voytik,

Please email me direct.

In message <1189883821.672248.152080@y42g2000hsy.googlegroups.com>, 
d.v.voytik@gmail.com writes
>Hi. I purchased CC1110DK from Texas Instruments. >After reading "IAR IDE User Manual Rev. 1.2" ( SWRU038 ) on page 4 >this: >"C2510/CC1110 has 4 configuration files associated. For CC2510 these >files are installed with >IAR Workbench, for CC1110 they can be downloaded from our web site." I >tried to find these files. No result - in "C:\Program Files\IAR Systems >\Embedded Workbench 4.05\8051\config\derivatives\chipcon" nothing, >only CC2430.* files. I installed IAR ver 7.20A form CD shipped with >Development Kit. >At www.ti.com i found the same result. >After sending mail to TI support i received this: >"Our system has detected that you may be on the Denied or Restricted >Parties List. By order of the United States Government, Texas >Instruments Inc. is prohibited from exporting or providing services of >any kind to any party identified on a denied or restricted parties >list." > >May be somebody can help me... >I am searching IAR CCxx10 files: CCxx10.i51, CCxx10.ddf, >lnk51ew_ccxx10.xcl, ioCCxx10.h > >Thanks 2 all for helping! >
-- \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ \/\/\/\/\ Chris Hills Staffs England /\/\/\/\/ /\/\/ chris@phaedsys.org www.phaedsys.org \/\/\ \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Reply by September 15, 20072007-09-15
Hi. I purchased CC1110DK from Texas Instruments.
After reading "IAR IDE User Manual Rev. 1.2" ( SWRU038 ) on page 4
this:
"C2510/CC1110 has 4 configuration files associated. For CC2510 these
files are installed with
IAR Workbench, for CC1110 they can be downloaded from our web site." I
tried to find these files. No result - in "C:\Program Files\IAR Systems
\Embedded Workbench 4.05\8051\config\derivatives\chipcon" nothing,
only CC2430.* files. I installed IAR ver 7.20A form CD shipped with
Development Kit.
At www.ti.com i found the same result.
After sending mail to TI support i received this:
"Our system has detected that you may be on the Denied or Restricted
Parties List. By order of the United States Government, Texas
Instruments Inc. is prohibited from exporting or providing services of
any kind to any party identified on a denied or restricted parties
list."

May be somebody can help me...
I am searching IAR CCxx10 files: CCxx10.i51, CCxx10.ddf,
lnk51ew_ccxx10.xcl, ioCCxx10.h

Thanks 2 all for helping!