"Ivanna Pee" <freak@Infectedmail.com> wrote in message
news:1191274619.335518.14080@d55g2000hsg.googlegroups.com...
> Group,
>
> This is not spam. I am looking for a respectable and reliable company
> to do some business with. My company has a design and schedule in mind
> that cannot be achieved without some external help.
>
> Specifically looking for a firm with experience using Micrium tools on
> STM32. My design lends itself to use of thier RTOS, File System, GUI
> and USB-MSD software.
>
"Ivanna Pee" <freak@Infectedmail.com> wrote in message
news:1191274619.335518.14080@d55g2000hsg.googlegroups.com...
> Group,
>
> This is not spam. I am looking for a respectable and reliable company
> to do some business with. My company has a design and schedule in mind
> that cannot be achieved without some external help.
>
> Specifically looking for a firm with experience using Micrium tools on
> STM32. My design lends itself to use of thier RTOS, File System, GUI
> and USB-MSD software.
If you would consider using OpenRTOS in place of uCOS then we offer a full
ISO9001:2000 registered development service, and are very experienced with
the M3. If this is of interest then I would be pleased to discuss your
requirements in more detail. You can contact me on:
r [dot] barry [ at] freertos [dot] org.
--
Regards,
Richard.
+ http://www.FreeRTOS.org
13 official architecture ports, 1000 downloads per week.
+ http://www.SafeRTOS.com
Certified by T�V as meeting the requirements for safety related systems.
Reply by linnix●October 1, 20072007-10-01
On Oct 1, 9:36 pm, Ivanna Pee <fr...@Infectedmail.com> wrote:
> Group,
>
> This is not spam. I am looking for a respectable and reliable company
> to do some business with. My company has a design and schedule in mind
> that cannot be achieved without some external help.
>
> Specifically looking for a firm with experience using Micrium tools on
> STM32. My design lends itself to use of thier RTOS, File System, GUI
> and USB-MSD software.
I am not familiar with Micrium, but we will be using Keil/ARM on
STM32F101.
We will likely be using a FT2232 based USB Jtag debugger.
This works fine with another Cortex M3, and STM32 looks almost
identical.
Reply by Ivanna Pee●October 1, 20072007-10-01
Group,
This is not spam. I am looking for a respectable and reliable company
to do some business with. My company has a design and schedule in mind
that cannot be achieved without some external help.
Specifically looking for a firm with experience using Micrium tools on
STM32. My design lends itself to use of thier RTOS, File System, GUI
and USB-MSD software.